Click Refresh to see the current status of your wireless connection. SSID (Network Name) will be populated now (see pages
Below it, Wireless Network Type may be set to Infrastructure if you're connecting the Wireless Ethernet Converter to a router or access point, or Ad hoc if you're connecting it to another wireless client.
Encryption Mode should be set to use the same type of encryption as the other wireless devices on your network. The Ethernet Converter supports WEP128, WEP64, TKIP, and AES encryption. AES is highly recommended if all your other wireless devices support it.
To the right of the encryption dropbox is the field where you enter your encryption key.
SSID, Encryption Mode, and Encryption Key must be set exactly the same in all of your wireless devices, or they will not be able to communicate with each other.
Check your router/access point's documentation if you don't know what the SSID, Encryption Mode, and Encryption key are on your network.
15