Buffalo Technology WRB-G54K Device Pre-conﬁguration Settings, WBR-G54 Wireless Broadband Router

Page 21

Device Pre-conﬁguration Settings

These settings can be used to manually restore Kit settings should they be inadvertently lost.

WBR-G54 (Wireless Broadband Router)

IP = 192.168.11.1 Username = root Password = SSID = Buffalo

DHCP Server = Enabled

Scope = 192.168.11.2 – 192.168.11.16 Channel = 11

WDS = enabled

Wireless MAC ID of the WLA-G54C entered into the access list.

WLA-G54C (Wireless Compact Repeater Bridge)

IP = 192.168.11.254 Username = root Password =

SSID = Buffalo

Channel = 11 WDS = Enabled

Wireless MAC ID of the WBR-G54 entered into the access list

21

Image 21

Contents Package Contents Setup GuideAdditional Requirements Connecting cables Refer to Figure Setting up the Router WBR-G54Remaining Steps apply to both Wired and Wireless Setup Perform the next step for Wireless Router Setup onlyWindows XP/2000 users Conﬁguring your computers IP addressAccess the AirStation conﬁguration For DSL Service For Cable Broadband Service Advanced Settings Optional Determining the Best Location For the Repeater WLA-G54C Ensure you are connected Other Windows Versions Using Client Manager Software Surveying your Environment Typical two story residential placement of repeater Skip to section Check Signal Strength Other Windows Versions Client Manager Software Required Check Signal Strength Backing Up Backing Up and Restoring your ConﬁgurationPage Restoring Device Pre-conﬁguration Settings WBR-G54 Wireless Broadband RouterWLA-G54C Wireless Compact Repeater Bridge WBR-G54 Speciﬁcations Wireless LANTCP/IP Http WLA-G54C Speciﬁcations