Buffalo Technology WLA-L11 specifications Cable is broken

Page 45

.

"Cannot Find AirStation" Is Displayed When Starting the Easy Installation Wizard

Cause (1)

The entered MAC address is incorrect when the AirStation is set from the wireless LAN per- sonal computer.

Remedy (1)

Check and reenter the AirStation’s MAC address.

For the MAC address, refer to the Parts Nomenclature and Functions section in Install Manual.

The factory-set group name is "Group". If you are setting for the first time, or have not changed the group name, check if it is set to "Group" or not.

Cause (2)

The hub and the AirStation are not connected when the AirStation is set from the Ethernet LAN personal computer.

Remedy (2)

•Check that the hub and the AirStation are firmly connected using a UTP straight cable. (Insert the cable until you hear a click.)

•Be sure to use a UTP straight cable to connect the AirStation and personal computers to the hub.

Cause (3)

The cable is broken.

Remedy (3)

Reconnect using good UTP straight cable.

Cause (4)

The hub is malfunctioning.

Remedy (4)

•Check if the AirStation and the hub Link lamps are flashing.

•Try connecting the another port on the hub.

Cause (5)

The communication mode for the connected hub and the AirStation is different.

Remedy (5)

Some hubs may not be able to connect correctly to the network using the Auto Negotiation set- ting. If this occurs, you must set the communications mode manually. Change the setting to other than Auto Negotiation. If you change the setting and there is still a communications prob- lem, and you can change the hub communications mode, change the hub communications mode manually to be the same as the AirStation’s mode.

To change the AirStation’s communications mode, refer to the "Setting Method" section (page

37)in Chapter 2, What is Next?

WLA-L11 User’s Manual

43

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Page Precaution for the Usage Using this ManualSymbols Glossary and Diacritical Marks Within the TextCommunication between a wireless LAN and a wired LAN Setup FlowNetwork Configuration Illustration Table of Contents Specifications LAN Port Connector Specifications Glossary Product SpecificationsCommunications Between Ethernet LAN and Wireless LAN InstallationTCP/IP Protocol Setting Preparing the AirStation SettingsOn the Personal Computer Windows 98/95Select TCP/IP, and then click the Properties button Restart Windows 98/95Adding TCP/IP Protocols Windows 98/95 Double-click the Local Area Connection icon WindowsTo Allocating IP Addresses page 52 Nections Adding the TCP/IP Protocols WindowsCheck if the Internet Protocol TCP/IP is WindowsNT4.0 Restart Windows NT Adding the TCP/IP Protocol Windows NTInstalling AirStation Manager Refer to AirStation Settings Settings Personal Computer Setting Procedure AirStation Settings Settings Personal ComputerLAN card to be used, and then click Click the Standard Settings button Settings Completed will be displayed. Close the Web browserSelect Edit, and Search AirStation Windows 2000/NTTion of the AirStation setting Connecting To the AirStation Tion Information Files to the diskDrive Installing Client Manager Setting the Wireless LAN Personal ComputerTry to set the network settings IP is setSelect Client Manager Installation and click Next Click OK. This completes Client Manager Programs , Melco Wireless LAN , and then Client Manager AirStation Connection SettingsManager Unavailable Even When Checking AirStation ConnectionCommunications not Connection Test ResultsCommunications With Other Personal Computers Double-click the Network Neighborhood icon on the DesktopDouble-click the personal computer you want to connect to Displaying AirStation Setting Screen What is Next?AirStation Setting What is Next?, and display the AirStation setting screenEnabling and Disabling Roaming Function Programs , Melco Airconnect , and then Client Manager Limiting Connections from Wireless LAN Per Sonal Computers You can register up to 256 MAC addresses maximum Add MAC Address will be displayed. Click the Return buttonStrengthening Security Using the WEP Encoding Function Multiple AirStation Groups Setting Send Mode Personal Computer Setting MethodGetting Started Dows personal computerChecking AirStation’s IP Address Reset the AirStation Setting to the Factory SettingsConnection and Diagnostic Checking the Wireless Frequency StatusConnection Test Result Troubleshooting Check if TCP/IP is correctly installed and set Cable is broken Setting Screen Is Not Displayed Internet Explorer Start Netscape Navigator Netscape Navigator 4.0 or LaterCause Enter the password WEP set in the AirStation Cannot Connect to PCs on the Ethernet LAN TCP/IP Protocol is not installed, or it is not set correctly Windows There Is a Dhcp Server on the Network Roaming Function Is Not Operating CorrectlyWLA-L11 User’s Manual Error Details when Diag Lamp Flashes Self-Diagnostic FunctionSetting Screen Configuration Bridge ModeDetailed Settings Bridge Mode Setting Screens ExplanationInformation of the Main Unit Machine DiagnosticsMAC Address Media Access Control Address Wireless ChannelDhcp Server LAN Local Area NetworkWindows 98/95 User Name and Password Windows 98/95 Shared Setting ScreensWEP Encryption Firmware Windows 98/95 Identification ScreenProtocol Displayed ScreenRoaming Function Ethernet LAN and Wireless LANSpecifications Product SpecificationsMDI Signal Assignment LAN Port Connector SpecificationsMemo Federal Communications Commission Notice PY00-26037-DM10-02
Related manuals
Manual 29 pages 49.89 Kb

WLA-L11 specifications

Buffalo Technology has established itself as a leading provider of networking solutions, and one of their standout products is the WLA-L11. This wireless access point combines advanced features and technologies that make it ideal for both home and office environments.

At the heart of the WLA-L11 is its dual-band capability, allowing for simultaneous connections on both the 2.4 GHz and 5 GHz bands. This dual-band functionality enhances connectivity, enabling users to experience faster speeds and better performance. The 2.4 GHz band is suitable for longer-range connectivity, while the 5 GHz band offers reduced interference and higher speeds, making it perfect for bandwidth-intensive activities like streaming and gaming.

The WLA-L11 supports the latest Wi-Fi 6 (802.11ax) standard, providing significant improvements over previous versions. This technology allows for higher data rates, improved capacity, and better performance in congested environments. With features like OFDMA (Orthogonal Frequency Division Multiple Access) and MU-MIMO (Multi-User Multiple Input Multiple Output), the access point can handle multiple devices simultaneously without sacrificing performance.

Security is a top priority for Buffalo Technology, and the WLA-L11 is no exception. It incorporates advanced encryption protocols, such as WPA3, ensuring that users' data remains secure. Unlike its predecessors, WPA3 offers enhanced protection against brute-force attacks and simplifies the process of connecting new devices.

In terms of physical design, the WLA-L11 boasts a sleek and compact form factor that allows for easy installation in any setting. It can be wall-mounted or placed on a desk, ensuring versatility in deployment. The access point also features Power over Ethernet (PoE) support, which eliminates the need for separate power cables, simplifying installation and reducing clutter.

Additionally, the WLA-L11 is equipped with advanced management capabilities, allowing users to easily configure and monitor their networks. The web-based management interface is user-friendly and provides access to various settings, including bandwidth allocation and guest network creation.

Overall, the Buffalo Technology WLA-L11 stands out for its combination of advanced dual-band Wi-Fi 6 technology, robust security features, and user-friendly design. It is an excellent choice for anyone looking to enhance their wireless networking experience, whether in a home or enterprise environment. With its reliability and performance, the WLA-L11 is set to meet the demands of modern connectivity.
Top Page Image Contents