Buffalo Technology WLA-L11 specifications Wireless Channel, Dhcp Server, LAN Local Area Network

Page 60

6 Glossary

This section explains the glossary of terms used in this manual that are required to configure the network.

Wireless Channel

If there is more than one Wireless LAN network with different ESS-ID on the same floor, and they are com- municating with each other, the baud rate may be slowed, due to the same radio frequency being used. If this happens, you can still communicate regardless of other LAN networks by using to use different frequencies (wireless channels).

Note: If they are communications using the wireless LAN, be sure to set all the Units the same wireless channel.

DHCP Server

When configuring the network TCP/IP, be sure to set the IP address in each personal computer and other devices. When there is a DHCP server on the network, you can assign IP addresses automatically to the per- sonal computers and the AirStation on the network. If there is Windows 2000, Windows NT, dial-up router, or other device with built-in DHCP server function on the network, the DCHP server function may start to operate. For the Windows NT server and dial-up router, or other DCHP server function, refer to the Win- dows 2000, Windows NT, or dial-up router manual, or consult the manufacturer. There should be no DHCP server problems for Windows 98/95 personal computers only on the network.

ESS-ID

This ID is used to prevent cross-communication during communication between the AirStation and personal computers within the wireless LAN. The Wireless LAN personal computers that have the same ESS-ID as the AirStation can communicate with the AirStation. (ESS-ID is disabled when wireless LAN personal com- puters are communicating each other.) Set the AirStation ESS-ID as follows: Last six digits of MAC address

+Group name. The ESS-ID is case sensitive. You can enter a maximum of 32 alphanumeric characters, and the underbar "_".

LAN (Local Area Network)

Read as one word. A LAN is a network in a comparatively small area, such as campus or within a single building. The LAN baud rate varies from 10 Mbps to 100 Mbps.

MAC Address (Media Access Control Address)

The MAC address is a physical address specific to each network card. The MAC address is configured from a total of six bytes as follows: A vendor code comprising the lead three bytes and a 3-byte user code. The vendor code is managed and assigned by IEEE. The user code is managed using a unique (unduplicated) number from the network card manufacturer. That is, the MAC address is assigned as a physical address unique throughout the world. In an Ethernet LAN, the MAC address is used as a base to create a frame for sending and receiving.

58

WLA-L11 User’s Manual

Page 59 Page 61
Image 60
Page 59 Page 61
Contents Page Using this Manual Precaution for the UsageSymbols Glossary and Diacritical Marks Within the TextCommunication between a wireless LAN and a wired LAN Setup FlowNetwork Configuration Illustration Table of Contents Glossary Product Specifications Specifications LAN Port Connector SpecificationsInstallation Communications Between Ethernet LAN and Wireless LANPreparing the AirStation Settings TCP/IP Protocol SettingOn the Personal Computer Windows 98/95Restart Windows 98/95 Select TCP/IP, and then click the Properties buttonAdding TCP/IP Protocols Windows 98/95 Windows Double-click the Local Area Connection iconTo Allocating IP Addresses page 52 Adding the TCP/IP Protocols Windows NectionsCheck if the Internet Protocol TCP/IP is WindowsNT4.0 Adding the TCP/IP Protocol Windows NT Restart Windows NTInstalling AirStation Manager Refer to AirStation Settings Settings Personal Computer AirStation Settings Settings Personal Computer Setting ProcedureLAN card to be used, and then click Settings Completed will be displayed. Close the Web browser Click the Standard Settings buttonWindows 2000/NT Select Edit, and Search AirStationTion of the AirStation setting Connecting To the AirStation Tion Information Files to the diskDrive Setting the Wireless LAN Personal Computer Installing Client ManagerTry to set the network settings IP is setSelect Client Manager Installation and click Next Click OK. This completes Client Manager AirStation Connection Settings Programs , Melco Wireless LAN , and then Client ManagerChecking AirStation Connection Manager Unavailable Even WhenConnection Test Results Communications notCommunications With Other Personal Computers Double-click the Network Neighborhood icon on the DesktopDouble-click the personal computer you want to connect to What is Next? Displaying AirStation Setting ScreenAirStation Setting What is Next?, and display the AirStation setting screenEnabling and Disabling Roaming Function Programs , Melco Airconnect , and then Client Manager Limiting Connections from Wireless LAN Per Sonal Computers Add MAC Address will be displayed. Click the Return button You can register up to 256 MAC addresses maximumStrengthening Security Using the WEP Encoding Function Multiple AirStation Groups Setting Send Mode Setting Method Personal ComputerGetting Started Dows personal computerReset the AirStation Setting to the Factory Settings Checking AirStation’s IP AddressChecking the Wireless Frequency Status Connection and DiagnosticConnection Test Result Troubleshooting Check if TCP/IP is correctly installed and set Cable is broken Setting Screen Is Not Displayed Internet Explorer Netscape Navigator 4.0 or Later Start Netscape NavigatorCause Enter the password WEP set in the AirStation Cannot Connect to PCs on the Ethernet LAN TCP/IP Protocol is not installed, or it is not set correctly Windows Roaming Function Is Not Operating Correctly There Is a Dhcp Server on the NetworkWLA-L11 User’s Manual Self-Diagnostic Function Error Details when Diag Lamp FlashesBridge Mode Setting Screen ConfigurationSetting Screens Explanation Detailed Settings Bridge ModeMachine Diagnostics Information of the Main UnitWireless Channel MAC Address Media Access Control AddressDhcp Server LAN Local Area NetworkWindows 98/95 User Name and Password Windows 98/95 Shared Setting ScreensWEP Encryption Windows 98/95 Identification Screen FirmwareProtocol Displayed ScreenEthernet LAN and Wireless LAN Roaming FunctionProduct Specifications SpecificationsLAN Port Connector Specifications MDI Signal AssignmentMemo Federal Communications Commission Notice PY00-26037-DM10-02
Related manuals
Manual 29 pages 49.89 Kb

WLA-L11 specifications

Buffalo Technology has established itself as a leading provider of networking solutions, and one of their standout products is the WLA-L11. This wireless access point combines advanced features and technologies that make it ideal for both home and office environments.

At the heart of the WLA-L11 is its dual-band capability, allowing for simultaneous connections on both the 2.4 GHz and 5 GHz bands. This dual-band functionality enhances connectivity, enabling users to experience faster speeds and better performance. The 2.4 GHz band is suitable for longer-range connectivity, while the 5 GHz band offers reduced interference and higher speeds, making it perfect for bandwidth-intensive activities like streaming and gaming.

The WLA-L11 supports the latest Wi-Fi 6 (802.11ax) standard, providing significant improvements over previous versions. This technology allows for higher data rates, improved capacity, and better performance in congested environments. With features like OFDMA (Orthogonal Frequency Division Multiple Access) and MU-MIMO (Multi-User Multiple Input Multiple Output), the access point can handle multiple devices simultaneously without sacrificing performance.

Security is a top priority for Buffalo Technology, and the WLA-L11 is no exception. It incorporates advanced encryption protocols, such as WPA3, ensuring that users' data remains secure. Unlike its predecessors, WPA3 offers enhanced protection against brute-force attacks and simplifies the process of connecting new devices.

In terms of physical design, the WLA-L11 boasts a sleek and compact form factor that allows for easy installation in any setting. It can be wall-mounted or placed on a desk, ensuring versatility in deployment. The access point also features Power over Ethernet (PoE) support, which eliminates the need for separate power cables, simplifying installation and reducing clutter.

Additionally, the WLA-L11 is equipped with advanced management capabilities, allowing users to easily configure and monitor their networks. The web-based management interface is user-friendly and provides access to various settings, including bandwidth allocation and guest network creation.

Overall, the Buffalo Technology WLA-L11 stands out for its combination of advanced dual-band Wi-Fi 6 technology, robust security features, and user-friendly design. It is an excellent choice for anyone looking to enhance their wireless networking experience, whether in a home or enterprise environment. With its reliability and performance, the WLA-L11 is set to meet the demands of modern connectivity.
Top Page Image Contents