Buffalo Technology WLA-L11 specifications Personal Computer, Getting Started, Setting Method

Page 39

Connecting to the AirStation Using an AirPort-compatible

Personal Computer

Getting Started

The following software is required when the Macintosh AirPort-compatible personal computer is used to share files with Windows personal computers.

•Software that supports shared files (e.g., DAVE).

Refer to the manual supplied with your software for details of settings to enable file sharing.

Setting Method

To connect to the AirStation using an AirPort-compatible computer, use the following procedure.

Before setting, check if the AirPort software has been installed, or not. (For the procedure for installing AirPort software, refer to the manual supplied with the AirPort.)

1

Display the AirStation setting screen using the settings personal computer (Win-

 

dows personal computer).

Refer to the "Displaying AirStation Setting Screen" section (page 29) in Chap- ter 2, What is Next?

2

3

4

Click the Device Diagnostic button.

The AirStation ESS-ID should be displayed in the ESS-ID field.

Start the AirPort-compatible computer. Select

Apple Menu on the menu Bar, and select Air-

Port. The AirPort setting tool will start.

5

From the pull-down menu in the Network

Selection field of AirPort Network, select the

AirStation ESS-ID that was identified in step 3.

37

WLA-L11 User’s Manual

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Page Glossary and Diacritical Marks Within the Text Using this ManualPrecaution for the Usage SymbolsCommunication between a wireless LAN and a wired LAN Setup FlowNetwork Configuration Illustration Table of Contents Specifications LAN Port Connector Specifications Glossary Product SpecificationsCommunications Between Ethernet LAN and Wireless LAN InstallationWindows 98/95 Preparing the AirStation SettingsTCP/IP Protocol Setting On the Personal ComputerSelect TCP/IP, and then click the Properties button Restart Windows 98/95Adding TCP/IP Protocols Windows 98/95 Double-click the Local Area Connection icon WindowsTo Allocating IP Addresses page 52 Nections Adding the TCP/IP Protocols WindowsCheck if the Internet Protocol TCP/IP is WindowsNT4.0 Restart Windows NT Adding the TCP/IP Protocol Windows NTInstalling AirStation Manager Refer to AirStation Settings Settings Personal Computer Setting Procedure AirStation Settings Settings Personal ComputerLAN card to be used, and then click Click the Standard Settings button Settings Completed will be displayed. Close the Web browserSelect Edit, and Search AirStation Windows 2000/NTTion of the AirStation setting Connecting To the AirStation Tion Information Files to the diskDrive IP is set Setting the Wireless LAN Personal ComputerInstalling Client Manager Try to set the network settingsSelect Client Manager Installation and click Next Click OK. This completes Client Manager Programs , Melco Wireless LAN , and then Client Manager AirStation Connection SettingsManager Unavailable Even When Checking AirStation ConnectionCommunications not Connection Test ResultsCommunications With Other Personal Computers Double-click the Network Neighborhood icon on the DesktopDouble-click the personal computer you want to connect to Displaying AirStation Setting Screen What is Next?AirStation Setting What is Next?, and display the AirStation setting screenEnabling and Disabling Roaming Function Programs , Melco Airconnect , and then Client Manager Limiting Connections from Wireless LAN Per Sonal Computers You can register up to 256 MAC addresses maximum Add MAC Address will be displayed. Click the Return buttonStrengthening Security Using the WEP Encoding Function Multiple AirStation Groups Setting Send Mode Dows personal computer Setting MethodPersonal Computer Getting StartedChecking AirStation’s IP Address Reset the AirStation Setting to the Factory SettingsConnection and Diagnostic Checking the Wireless Frequency StatusConnection Test Result Troubleshooting Check if TCP/IP is correctly installed and set Cable is broken Setting Screen Is Not Displayed Internet Explorer Start Netscape Navigator Netscape Navigator 4.0 or LaterCause Enter the password WEP set in the AirStation Cannot Connect to PCs on the Ethernet LAN TCP/IP Protocol is not installed, or it is not set correctly Windows There Is a Dhcp Server on the Network Roaming Function Is Not Operating CorrectlyWLA-L11 User’s Manual Error Details when Diag Lamp Flashes Self-Diagnostic FunctionSetting Screen Configuration Bridge ModeDetailed Settings Bridge Mode Setting Screens ExplanationInformation of the Main Unit Machine DiagnosticsLAN Local Area Network Wireless ChannelMAC Address Media Access Control Address Dhcp ServerWindows 98/95 User Name and Password Windows 98/95 Shared Setting ScreensWEP Encryption Displayed Screen Windows 98/95 Identification ScreenFirmware ProtocolRoaming Function Ethernet LAN and Wireless LANSpecifications Product SpecificationsMDI Signal Assignment LAN Port Connector SpecificationsMemo Federal Communications Commission Notice PY00-26037-DM10-02
Related manuals
Manual 29 pages 49.89 Kb

WLA-L11 specifications

Buffalo Technology has established itself as a leading provider of networking solutions, and one of their standout products is the WLA-L11. This wireless access point combines advanced features and technologies that make it ideal for both home and office environments.

At the heart of the WLA-L11 is its dual-band capability, allowing for simultaneous connections on both the 2.4 GHz and 5 GHz bands. This dual-band functionality enhances connectivity, enabling users to experience faster speeds and better performance. The 2.4 GHz band is suitable for longer-range connectivity, while the 5 GHz band offers reduced interference and higher speeds, making it perfect for bandwidth-intensive activities like streaming and gaming.

The WLA-L11 supports the latest Wi-Fi 6 (802.11ax) standard, providing significant improvements over previous versions. This technology allows for higher data rates, improved capacity, and better performance in congested environments. With features like OFDMA (Orthogonal Frequency Division Multiple Access) and MU-MIMO (Multi-User Multiple Input Multiple Output), the access point can handle multiple devices simultaneously without sacrificing performance.

Security is a top priority for Buffalo Technology, and the WLA-L11 is no exception. It incorporates advanced encryption protocols, such as WPA3, ensuring that users' data remains secure. Unlike its predecessors, WPA3 offers enhanced protection against brute-force attacks and simplifies the process of connecting new devices.

In terms of physical design, the WLA-L11 boasts a sleek and compact form factor that allows for easy installation in any setting. It can be wall-mounted or placed on a desk, ensuring versatility in deployment. The access point also features Power over Ethernet (PoE) support, which eliminates the need for separate power cables, simplifying installation and reducing clutter.

Additionally, the WLA-L11 is equipped with advanced management capabilities, allowing users to easily configure and monitor their networks. The web-based management interface is user-friendly and provides access to various settings, including bandwidth allocation and guest network creation.

Overall, the Buffalo Technology WLA-L11 stands out for its combination of advanced dual-band Wi-Fi 6 technology, robust security features, and user-friendly design. It is an excellent choice for anyone looking to enhance their wireless networking experience, whether in a home or enterprise environment. With its reliability and performance, the WLA-L11 is set to meet the demands of modern connectivity.
Top Page Image Contents