Bay Technical Associates 303 System Information, Switch Information, Spanning Tree Information

Page 61

Customizing and Managing the BayStack Switches

System Information

The System Information screen displays the current parameter settings for the switch. All of the screens associated with system information are read only. To change any parameter or setting you must go through the System Configuration menu.

The System Information screen provides three paths to switch statistics and status information. The following options are available from the System Information Screen:

Switch Information

Spanning Tree Information

Port Statistics and Status Information

Switch Information

The Switch Information screen displays the following switch parameter settings:

SNMP Read Community String: public

SNMP Read/Write Community String: private

Authentication Trap: [Disabled]

LinkUp/LinkDown Trap: [Disabled]

Trap Receiver 1 IP and Community Name: [0.0.0.0] [public]

Trap Receiver 2 IP and Community Name: [0.0.0.0] [public]

Trap Receiver 3 IP and Community Name: [0.0.0.0] [public]

Trap Receiver 4 IP and Community Name: [0.0.0.0] [public]

Spanning Tree Mode: [Enabled]

Telnet Access: [ ]

Spanning Tree Information

The Spanning Tree statistics and information are divided into two areas:

Spanning Tree General Information

Spanning Tree Port Information

893-01010-A

3-7

Image 61
Contents Using BayStack 303 Ethernet Switches Statement of Conditions TrademarksFederal Communications Commission FCC Statement EN 55 022 Declaration of Conformance 893-01010-A Contents Chapter Installing the BayStack Switches Appendix a Technical Specifications Viii Figures 893-01010-A Tables Xii Audience PurposeConventions Two-tiered Procedure FormatSpecial Message Formats Use of Enter, Type, and PressOrdering Bay Networks Publications How to Get HelpBay Networks Customer Support Region Telephone number Fax numberFor More Information Technical Solutions Center Telephone number Fax numberSafety Alert Message Format Xviii Class a Product Safety Alert Messages Used in This GuideCopyright See Caution on Accumulated Weight Shelf or Table MountStacking Units in a Rack See Warning on Turning Off Power to the UnitReset To Default Settings Command Removing the Top Cover Features Introduction to the BayStack 303 and 304 Ethernet SwitchesUsing the BayStack 303 and 304 Ethernet Switches Front Panel Physical Description10BASE-T Ports BayStack 303 switch front panelPin MDI-X signal RJ-45 connector pinout10/100BASE-TX Port MDA Slot Console Port ConnectorPins Signal name Direction DB-9 connector pin assignmentsLEDs Front-panel LEDsPower and Status LEDs Power Cord SpecificationsPower Status Meaning Country/Plug description Specifications Typical plug International power cord specificationsPage Installation Requirements Chapter Installing the BayStack SwitchesInstalling the BayStack Switches on a Flat Surface Installation ProcedureAttach the power cord to the back of the switch Installing the BayStack Switch in a RackPositioning the chassis in the rack Installing a Metal Chassis in a RackInstalling metal chassis in rack Installing a Plastic Chassis in a RackInstalling the plastic chassis in the rack Completing Rack Mounting Installation Connecting 10BASE-T Ports Attaching Devices to the BayStack Switch100 Mb/s port connections Connecting the 10/100BASE-TX PortAutonegotiation Connecting to the Console Port Connecting the 100BASE-FX PortUsing the BayStack 303 and 304 Ethernet Switches Connecting to the console port Power-up Self-TestsPower Up Self Test screen Using Factory Default Settings Initial Setup of a BayStack Ethernet SwitchFactory default settings Parameter Default valueLanguage selection menu Selecting a LanguageMain Menu Initial Switch SetupType 2 to select 2---System Configuration from the Main Menu Type 1 in the command line Type 2 in the command line Using the Menus and Screens Customizing and Managing the BayStack SwitchesLanguage Selection Menu Menu and screen hierarchyMenu and screen areas Menu and Screen AreasNavigation Commands and Command Line Area Switch Status AreaCentral Screen Area Menu and Screen Descriptions Main Menu Language Selection MenuSystem Information Switch InformationSpanning Tree Information Spanning Tree General Information Customizing and Managing the BayStack Switches Port Statistics and Status Information Spanning Tree Port InformationCustomizing and Managing the BayStack Switches System Configuration Switch Network Configuration Spanning Tree Configuration Port ConfigurationGeneral Configuration Snmp Configuration Reset System Using the BayStack SwitchReset to Default Exit TelnetAfter BeforeSpanning Tree Protocol BayStack 303 as a desktop switchNetwork Management with Snmp Managing the BayStack SwitchesMIB Network Management through a Serial I/O Connection Network Management Using a Telnet ConnectionType 3 to select Reset System from the Main Menu Upgrading Switch Software Through Tftp ConnectionPress Return when the Power Up Self Test screen is displayed Type 1 to select Upgrade Switch Software Page BayStack 303 and 304 Switch-related Issues Chapter Troubleshooting and DiagnosticsAutonegotiation MDI-X to MDI cable connections MDI and MDI-X ConnectionsMDI-X to MDI-X cable connections Installation-related IssuesCabling AddressesLink Status General Specifications Physical Specifications Safety Agency ApprovalsPerformance Specifications Hardware ArchitectureDeclaration of Conformity Page Appendix B Media Dependent Adapters MDAs Label Color State Meaning Table B-1 100BASE-FX MDA LEDs10/100BASE-TX MDA Table B-2 100BASE-TX MDA LEDs Installing an MDAFigure B-3. Installing an MDA Page Autonegotiation, 1-5, 2-11 NumbersIndex-2 Index-3 Index-4 Index-5

304, 303 specifications

Bay Technical Associates (BTA) has established itself as a leader in the field of technology, particularly with the introduction of their BTA 303 and 304 models. These devices are designed to meet the increasing demands of various industries, ranging from telecommunications to manufacturing, by offering cutting-edge features and robust performance.

The BTA 303 is a versatile system that integrates advanced processing capabilities with a user-friendly interface. It comes equipped with high-speed data processing units that enable rapid analysis and decision-making. One of the standout features of the 303 model is its modular design, allowing users to easily customize and expand the system based on their specific requirements. This flexibility makes it an ideal choice for businesses looking to scale their operations without the need for a complete systems overhaul.

On the other hand, the BTA 304 pushes the envelope with its enhanced connectivity options. It supports multiple communication protocols, including Ethernet, Wi-Fi, and Bluetooth, which ensures seamless integration with other devices and systems. This level of connectivity is crucial for industries that rely on real-time data exchange and remote monitoring. Furthermore, the 304 model is equipped with advanced security features that protect sensitive information, a critical aspect in today’s data-driven world.

Both the BTA 303 and 304 leverage state-of-the-art technologies to enhance performance. They are built on a robust architecture that allows for high levels of data throughput without compromising on reliability. Additionally, these systems incorporate machine learning algorithms that enable predictive analytics, helping businesses to foresee challenges and optimize their operations accordingly.

In terms of user experience, BTA has focused on developing intuitive software that simplifies system management. The graphical user interface (GUI) is designed to be accessible, enabling users at all skill levels to navigate and utilize the system effectively. Comprehensive customer support is also provided, ensuring that users can maximize the potential of their BTA systems.

In conclusion, the BTA 303 and 304 models from Bay Technical Associates are exemplary systems that combine advanced features, modern technologies, and user-centric design. Their modularity, connectivity, and analytical capabilities position them as essential tools across various industries, driving efficiency and innovation. With ongoing advancements in technology, BTA continues to evolve, ensuring that its offerings remain at the forefront of the market.