Bay Technical Associates 303, 304 manual Using the BayStack Switch, Reset System, Exit Telnet

Page 71

Customizing and Managing the BayStack Switches

Reset to Default

This option allows you to reset the switch to all the factory default settings. When this option is performed, the Language selection menu is displayed at the power-up sequence because it does not have a default setting.

Caution: If you choose the Reset to Default settings command, all of your configuration settings are replaced with factory default settings when you press Enter.

Reset System

The Reset System selection allows you to perform a software-controlled reset of your BayStack switch. Enter 3 in the command line from the Main Menu to reset the switch. The switch restarts as if power had been cycled and displays the Main Menu. This reset differs from the Reset to Default option in that it does not reset any parameter setting and it does not redisplay the Language selection menu.

Exit Telnet

This option allows you to exit the current Telnet session.

Using the BayStack Switch

This section provides the following information:

•Examples of configuring a network using the BayStack 303 or 304 switch

•Spanning Tree Protocol

•Management using SNMP

Configuration Examples

The BayStack 303 and 304 switches are well suited for the initial migration from shared 10BASE-T segments to dedicated bandwidth for switch connections between segments, end-stations, 100BASE-T Fast Ethernet servers, and fiber or copper Fast Ethernet backbone connections. The switches also function well as segment or desktop switches. Figure 3-3 illustrates a situation where a BayStack 304 switch can be added as a segment switch to alleviate user contention for bandwidth and to eliminate server and network center bottlenecks.

893-01010-A

3-17

Page 70 Page 72
Image 71
Page 70 Page 72
Contents Using BayStack 303 Ethernet Switches Federal Communications Commission FCC Statement TrademarksStatement of Conditions EN 55 022 Declaration of Conformance 893-01010-A Contents Chapter Installing the BayStack Switches Appendix a Technical Specifications Viii Figures 893-01010-A Tables Xii Audience PurposeUse of Enter, Type, and Press Two-tiered Procedure FormatConventions Special Message FormatsRegion Telephone number Fax number How to Get HelpOrdering Bay Networks Publications Bay Networks Customer SupportFor More Information Technical Solutions Center Telephone number Fax numberSafety Alert Message Format Xviii Copyright Safety Alert Messages Used in This GuideClass a Product See Caution on Accumulated Weight Shelf or Table MountStacking Units in a Rack See Warning on Turning Off Power to the UnitReset To Default Settings Command Removing the Top Cover Features Introduction to the BayStack 303 and 304 Ethernet SwitchesUsing the BayStack 303 and 304 Ethernet Switches Front Panel Physical Description10BASE-T Ports BayStack 303 switch front panel10/100BASE-TX Port RJ-45 connector pinoutPin MDI-X signal MDA Slot Console Port ConnectorFront-panel LEDs DB-9 connector pin assignmentsPins Signal name Direction LEDsPower Status Meaning Power Cord SpecificationsPower and Status LEDs Country/Plug description Specifications Typical plug International power cord specificationsPage Installation Requirements Chapter Installing the BayStack SwitchesInstalling the BayStack Switches on a Flat Surface Installation ProcedureAttach the power cord to the back of the switch Installing the BayStack Switch in a RackPositioning the chassis in the rack Installing a Metal Chassis in a RackInstalling metal chassis in rack Installing a Plastic Chassis in a RackInstalling the plastic chassis in the rack Completing Rack Mounting Installation Connecting 10BASE-T Ports Attaching Devices to the BayStack Switch100 Mb/s port connections Connecting the 10/100BASE-TX PortAutonegotiation Connecting to the Console Port Connecting the 100BASE-FX PortUsing the BayStack 303 and 304 Ethernet Switches Connecting to the console port Power-up Self-TestsPower Up Self Test screen Parameter Default value Initial Setup of a BayStack Ethernet SwitchUsing Factory Default Settings Factory default settingsLanguage selection menu Selecting a LanguageMain Menu Initial Switch SetupType 2 to select 2---System Configuration from the Main Menu Type 1 in the command line Type 2 in the command line Using the Menus and Screens Customizing and Managing the BayStack SwitchesLanguage Selection Menu Menu and screen hierarchyMenu and screen areas Menu and Screen AreasCentral Screen Area Switch Status AreaNavigation Commands and Command Line Area Menu and Screen Descriptions Main Menu Language Selection MenuSpanning Tree Information Switch InformationSystem Information Spanning Tree General Information Customizing and Managing the BayStack Switches Port Statistics and Status Information Spanning Tree Port InformationCustomizing and Managing the BayStack Switches System Configuration Switch Network Configuration Spanning Tree Configuration Port ConfigurationGeneral Configuration Snmp Configuration Exit Telnet Using the BayStack SwitchReset System Reset to DefaultAfter BeforeSpanning Tree Protocol BayStack 303 as a desktop switchNetwork Management with Snmp Managing the BayStack SwitchesMIB Network Management through a Serial I/O Connection Network Management Using a Telnet ConnectionType 3 to select Reset System from the Main Menu Upgrading Switch Software Through Tftp ConnectionPress Return when the Power Up Self Test screen is displayed Type 1 to select Upgrade Switch Software Page BayStack 303 and 304 Switch-related Issues Chapter Troubleshooting and DiagnosticsAutonegotiation MDI-X to MDI cable connections MDI and MDI-X ConnectionsMDI-X to MDI-X cable connections Installation-related IssuesCabling AddressesLink Status General Specifications Hardware Architecture Safety Agency ApprovalsPhysical Specifications Performance SpecificationsDeclaration of Conformity Page Appendix B Media Dependent Adapters MDAs Label Color State Meaning Table B-1 100BASE-FX MDA LEDs10/100BASE-TX MDA Table B-2 100BASE-TX MDA LEDs Installing an MDAFigure B-3. Installing an MDA Page Autonegotiation, 1-5, 2-11 NumbersIndex-2 Index-3 Index-4 Index-5

304, 303 specifications

Bay Technical Associates (BTA) has established itself as a leader in the field of technology, particularly with the introduction of their BTA 303 and 304 models. These devices are designed to meet the increasing demands of various industries, ranging from telecommunications to manufacturing, by offering cutting-edge features and robust performance.

The BTA 303 is a versatile system that integrates advanced processing capabilities with a user-friendly interface. It comes equipped with high-speed data processing units that enable rapid analysis and decision-making. One of the standout features of the 303 model is its modular design, allowing users to easily customize and expand the system based on their specific requirements. This flexibility makes it an ideal choice for businesses looking to scale their operations without the need for a complete systems overhaul.

On the other hand, the BTA 304 pushes the envelope with its enhanced connectivity options. It supports multiple communication protocols, including Ethernet, Wi-Fi, and Bluetooth, which ensures seamless integration with other devices and systems. This level of connectivity is crucial for industries that rely on real-time data exchange and remote monitoring. Furthermore, the 304 model is equipped with advanced security features that protect sensitive information, a critical aspect in today’s data-driven world.

Both the BTA 303 and 304 leverage state-of-the-art technologies to enhance performance. They are built on a robust architecture that allows for high levels of data throughput without compromising on reliability. Additionally, these systems incorporate machine learning algorithms that enable predictive analytics, helping businesses to foresee challenges and optimize their operations accordingly.

In terms of user experience, BTA has focused on developing intuitive software that simplifies system management. The graphical user interface (GUI) is designed to be accessible, enabling users at all skill levels to navigate and utilize the system effectively. Comprehensive customer support is also provided, ensuring that users can maximize the potential of their BTA systems.

In conclusion, the BTA 303 and 304 models from Bay Technical Associates are exemplary systems that combine advanced features, modern technologies, and user-centric design. Their modularity, connectivity, and analytical capabilities position them as essential tools across various industries, driving efficiency and innovation. With ongoing advancements in technology, BTA continues to evolve, ensuring that its offerings remain at the forefront of the market.
Top Page Image Contents