Bay Technical Associates 304, 303 manual Snmp Configuration

Page 70

Using the BayStack 303 and 304 Ethernet Switches

SNMP Configuration

The SNMP Configuration menu displays a list of the parameters that allow you to set and change values, parameters, and addresses within an SNMP management environment. To change any setting, type in the corresponding number. The screen is refreshed, and the command line displays the current parameter value for the selected parameter and allows you to enter new data. The SNMP configuration parameters that can be changed are listed on the screen as follows:

1---SNMP Read Community String

Sets the in-band read-only SNMP operations. Default setting is public.

2---SNMP Read/Write Community String

Sets the in-band read/write SNMP operations. Default setting is private.

Warning: With the cursor at selections 1 or 2, pressing Enter without typing a selection deletes the current setting.

3---Trap Receiver 1 Community Name and IP Address

Number one of four allowed Trap IP Addresses. Successive Trap Address fields are numbered #2, #3, and #4. Each of the Trap addresses has an associated Community String. Default value is 0.0.0.0. (no IP address assigned) and public.

4---Trap Receiver 2 Community Name and IP Address 5---Trap Receiver 3 Community Name and IP Address 6---Trap Receiver 4 Community Name and IP Address 7---Authentication Trap Generation

Enables or disables sending a trap on an SNMP authentication failure. Default setting is Disabled.

8---LinkUp/LinkDown Trap Generation

3-16

893-01010-A

Image 70
Contents Using BayStack 303 Ethernet Switches Statement of Conditions TrademarksFederal Communications Commission FCC Statement EN 55 022 Declaration of Conformance 893-01010-A Contents Chapter Installing the BayStack Switches Appendix a Technical Specifications Viii Figures 893-01010-A Tables Xii Purpose AudienceSpecial Message Formats Two-tiered Procedure FormatConventions Use of Enter, Type, and PressBay Networks Customer Support How to Get HelpOrdering Bay Networks Publications Region Telephone number Fax numberTechnical Solutions Center Telephone number Fax number For More InformationSafety Alert Message Format Xviii Class a Product Safety Alert Messages Used in This GuideCopyright Accumulated Weight Shelf or Table Mount See Caution onStacking Units in a Rack Turning Off Power to the Unit See Warning onReset To Default Settings Command Removing the Top Cover Introduction to the BayStack 303 and 304 Ethernet Switches FeaturesUsing the BayStack 303 and 304 Ethernet Switches Physical Description Front PanelBayStack 303 switch front panel 10BASE-T PortsPin MDI-X signal RJ-45 connector pinout10/100BASE-TX Port Console Port Connector MDA SlotLEDs DB-9 connector pin assignmentsPins Signal name Direction Front-panel LEDsPower and Status LEDs Power Cord SpecificationsPower Status Meaning International power cord specifications Country/Plug description Specifications Typical plugPage Chapter Installing the BayStack Switches Installation RequirementsInstallation Procedure Installing the BayStack Switches on a Flat SurfaceInstalling the BayStack Switch in a Rack Attach the power cord to the back of the switchInstalling a Metal Chassis in a Rack Positioning the chassis in the rackInstalling a Plastic Chassis in a Rack Installing metal chassis in rackInstalling the plastic chassis in the rack Completing Rack Mounting Installation Attaching Devices to the BayStack Switch Connecting 10BASE-T PortsConnecting the 10/100BASE-TX Port 100 Mb/s port connectionsAutonegotiation Connecting the 100BASE-FX Port Connecting to the Console PortUsing the BayStack 303 and 304 Ethernet Switches Power-up Self-Tests Connecting to the console portPower Up Self Test screen Factory default settings Initial Setup of a BayStack Ethernet SwitchUsing Factory Default Settings Parameter Default valueSelecting a Language Language selection menuInitial Switch Setup Main MenuType 2 to select 2---System Configuration from the Main Menu Type 1 in the command line Type 2 in the command line Customizing and Managing the BayStack Switches Using the Menus and ScreensMenu and screen hierarchy Language Selection MenuMenu and Screen Areas Menu and screen areasNavigation Commands and Command Line Area Switch Status AreaCentral Screen Area Menu and Screen Descriptions Language Selection Menu Main MenuSystem Information Switch InformationSpanning Tree Information Spanning Tree General Information Customizing and Managing the BayStack Switches Spanning Tree Port Information Port Statistics and Status InformationCustomizing and Managing the BayStack Switches System Configuration Switch Network Configuration Port Configuration Spanning Tree ConfigurationGeneral Configuration Snmp Configuration Reset to Default Using the BayStack SwitchReset System Exit TelnetBefore AfterBayStack 303 as a desktop switch Spanning Tree ProtocolManaging the BayStack Switches Network Management with SnmpMIB Network Management Using a Telnet Connection Network Management through a Serial I/O ConnectionUpgrading Switch Software Through Tftp Connection Type 3 to select Reset System from the Main MenuPress Return when the Power Up Self Test screen is displayed Type 1 to select Upgrade Switch Software Page Chapter Troubleshooting and Diagnostics BayStack 303 and 304 Switch-related IssuesAutonegotiation MDI and MDI-X Connections MDI-X to MDI cable connectionsInstallation-related Issues MDI-X to MDI-X cable connectionsAddresses CablingLink Status General Specifications Performance Specifications Safety Agency ApprovalsPhysical Specifications Hardware ArchitectureDeclaration of Conformity Page Appendix B Media Dependent Adapters MDAs Table B-1 100BASE-FX MDA LEDs Label Color State Meaning10/100BASE-TX MDA Installing an MDA Table B-2 100BASE-TX MDA LEDsFigure B-3. Installing an MDA Page Numbers Autonegotiation, 1-5, 2-11Index-2 Index-3 Index-4 Index-5

304, 303 specifications

Bay Technical Associates (BTA) has established itself as a leader in the field of technology, particularly with the introduction of their BTA 303 and 304 models. These devices are designed to meet the increasing demands of various industries, ranging from telecommunications to manufacturing, by offering cutting-edge features and robust performance.

The BTA 303 is a versatile system that integrates advanced processing capabilities with a user-friendly interface. It comes equipped with high-speed data processing units that enable rapid analysis and decision-making. One of the standout features of the 303 model is its modular design, allowing users to easily customize and expand the system based on their specific requirements. This flexibility makes it an ideal choice for businesses looking to scale their operations without the need for a complete systems overhaul.

On the other hand, the BTA 304 pushes the envelope with its enhanced connectivity options. It supports multiple communication protocols, including Ethernet, Wi-Fi, and Bluetooth, which ensures seamless integration with other devices and systems. This level of connectivity is crucial for industries that rely on real-time data exchange and remote monitoring. Furthermore, the 304 model is equipped with advanced security features that protect sensitive information, a critical aspect in today’s data-driven world.

Both the BTA 303 and 304 leverage state-of-the-art technologies to enhance performance. They are built on a robust architecture that allows for high levels of data throughput without compromising on reliability. Additionally, these systems incorporate machine learning algorithms that enable predictive analytics, helping businesses to foresee challenges and optimize their operations accordingly.

In terms of user experience, BTA has focused on developing intuitive software that simplifies system management. The graphical user interface (GUI) is designed to be accessible, enabling users at all skill levels to navigate and utilize the system effectively. Comprehensive customer support is also provided, ensuring that users can maximize the potential of their BTA systems.

In conclusion, the BTA 303 and 304 models from Bay Technical Associates are exemplary systems that combine advanced features, modern technologies, and user-centric design. Their modularity, connectivity, and analytical capabilities position them as essential tools across various industries, driving efficiency and innovation. With ongoing advancements in technology, BTA continues to evolve, ensuring that its offerings remain at the forefront of the market.