Znyx Networks ZX4300P manual Connecting the Cables, LED Reference

Page 8

Installation

Connecting the Cables

The ZX4300P uses Broadcom's proprietary HP-AutoMDI-X technology that senses the cable attachment and adjusts it's internal Transmit and receive paths accordingly. The ports of the switch will auto-sense and correct for MDI (straight-through) or MDI-X (crossover) cabling.

LED Reference

The LED lights on the ZX4300P switch and corresponding Rear Transition Board (RTB) provide diagnostic and activity information during power up and normal use of the switch. A definition of each LED is included in this section.

SPD100

ACT

LNK

0

Extraction lever

ZX4300PFront Display Panel

ZX4300P Series User's Guide

Page 5

Image 8

Contents ZX4300P 10/100 Ethernet Switch Copyright Notice About this Manual Technical SupportOverview of the ZX4300PSwitch Rear Transition Board RTB models for the ZX4300P Features of the ZX4300PSwitchZX4300P Models Installing the ZX4300P cPCI Card InstallationPreparing for the Install Installing the Rear Transition Board RTB Connecting the Cables LED ReferenceZX4300P Series LED Reference Key LEDLegal Notices and Certification FCC Class a Notice ZX4300P SeriesConnector Pin Assignments Standard and Extended Board J5 Pin AssignmentsExtended Fabric Board J4 Pin Assignment Standard and Extended Fabric Board J3 Pin Assignment PinNode & Fabric Board J2 Pin Assignment Node & Fabric Board J1 Pin Assignment Connector Pinouts Patch Panel Cable Specifications Figure D-1 Cable Attached to the ZXRTB24RUTPCH8SR25