Znyx Networks manual Features of the ZX4300PSwitch, ZX4300P Models

Overview

Features of the ZX4300PSwitch

The ZX4300P switch best satisfies the demand for high density, low cost, and high performance. It enables system architects to accelerate development of their next-generation CPSB products and achieve first-to-market deployment.

•Designed for use in CompactPCI PICMG 2.16 fabric slots

•Designed for standard CompactPCI chassis slots

•Designed with 3 optional Rear Transition Board (RTB) configurations

•Layer 2 switching

•Non-blocking line-rate performance

•802.3x and back-pressure flow control

•HotSwap™ and CarrierClass™

•Works with any host OS or CPU

•Minimal power consumption (5V at 2.85A; full traffic rate)

ZX4300P Models

Model Fast Ethernet Channels

ZX4300P

24 ports to CompactPCI Packet Switched Backplane (CPSB).

When installed in a CPSB chassis, the ZX4500P may be used with the ZXRTB05 RTB or without any RTB.

Rear Transition Board (RTB) models for the ZX4300P

Model	Fast Ethernet Channels
ZXRTB05	Single-slot wide RTB with 5 ports egressed through RJ-45 ports.
	Remaining 19 ports are CPSB. Use this RTB only with CPSB chassis.
ZXRTB24	Two-slot wide RTB with all 24 ports egressed through RJ-45 ports. For
	use in standard CompactPCI chassis without H.110 bus.
	Single-slot wide RTB with all 24 ports egressed through two RJ-21 telco
ZXRTB24R	connectors (use with dual RJ-21 cables and 1U RJ-45 patch panel, not
	included). For use in standard CompactPCI chassis without H.110 bus.

ZX4300P Series User's Guide Page 2