Zhone Technologies 08-01002-01 manual Installing the Desk Mount Filter

1-8Installing the Elite Modem

Task:

Installing the Desk Mount Filter

It is important that the telephone filters be installed correctly. Follow these instructions precisely. If the telephone filter is installed incorrectly (reversed), the filter will not allow voice signals to pass. (See Figure 1-1, Desk Mount Filter Connections.)

Step Action

1Check for a dial tone.

2Disconnect the telephone line cord from the wall jack and insert it into the jack on the filter identified with this telephone icon:

3A 7-foot RJ-11 telephone line cord is supplied with the filter. Connect one end of the line cord into the jack on the filter identified with this icon:

4Plug the other end of the 7-foot line cord into the wall jack.

5Verify that ther is a dial tone. If a dial tone is not present, check all connections.

Figure 1-1. Desk Mount Filter Connections

STOP

You have completed this task.

Revision 2.01 Elite Modem Installation Guide 08-01002-01