Zhone Technologies 4821-A2 manual Preparation, Installation Site

Installation

Preparation

Consider the following before installing the BitStorm 4800 Express IP

DSLAM:

z

z

z

z

Installation Site

Your installation site should be well ventilated, clean, and free of environmental extremes.

Installation Options

The BitStorm 4800 Express may be:

—Mounted with the included mounting brackets in a standard 19-inch (483 mm) or 23-inch (584 mm) rack (including both Bay Networks and Nortel 23-inch racks), or, with separately purchased mounting brackets, in a 21-inch (535 mm) ETSI rack. ETSI brackets are available from Paradyne. See Appendix B-,Equipment List.

As many BitStorm 4800 Express units may be mounted in a standard rack as there are 1.75-inch (44.45 mm) spaces in the rack, so long as adequate cooling is provided.

—Mounted vertically against a wall.

The standard mounting brackets provided can be fastened to the base of the unit for wall mounting.

—Set on a shelf or desktop.

Up to five BitStorm 4800 Express units may be stacked on a shelf or desktop.

Power

The BitStorm 4800 Express operates from a 90 to 265 VAC, 47 to 63 Hz power source.

Cabling

No cable except the power cable is provided with the BitStorm 4800 Express. See Table 2, Cable Descriptions, to determine what cables you need to procure before installation.

14 BitStorm 4800 Express Model 4821-A2 Installation Guide 4821-A2-ZN21-30