Zhone Technologies 4821-A2 manual Management Port

Cabling

Management Port

Port 1 can be used to connect the BitStorm 4800 Express to a network management system using a 10BaseT or 100BaseT LAN. A straight-through cable can be used regardless of the destination interface, since the port automatically distinguishes between an MDI and an MDIX.

To use Port 1 as the out-of-band management port:

1Connect an 8-position modular cable to Port 1.

2If the BitStorm 4800 Express is in a rack, fasten the cable to a rail with a cable tie.

3Connect the other end of the cable to your Ethernet switch or a network interface card in a PC.

Ethernet Switch

CONSOLE	PORT1	PORT2
	10/100BT
		10/100BT

STATUS	ALARM	TEST
		1	3	5	7	9
							11	13	15	17
											19	21	23
		2	4											25	27
				6	8	10	12	14								29	31	33	35	37
									16	18	20	22									39	41	43	45
													24	26	28	30									47
																	32	34	36
																				38	40	42
																							44	46	48

Port 1

DSL PORTS 1-24

04-17529

28 BitStorm 4800 Express Model 4821-A2 Installation Guide 4821-A2-ZN21-30