Zhone Technologies 4821-A2 manual Cables Required, DSL Ports

Cables Required

Cables Required

Table 2 shows all the cables that may be required for your installation.

Table 2: Cable Descriptions

Connector
Name	Connector and Cable		For Connecting . . .
DSL PORTS	50-pin RJ21X Telco-type		Up to 24 DSL ports per
1–24	straight connector and		cable to a POTS splitter.
	50-wire cable. Two cables
DSL Ports 25–48	required for 48-port model.
(if installed)
Port 2	8-position modular plug		The BitStorm 4800
10/100BaseT	and 8-wire Category 5 or		Express to a network.
	better unshielded twisted
	pair (UTP) cable.
Port 1	8-position modular plug		A Network Management
10/100BaseT	and 8-wire Category 5 or		System (NMS) over a
	better unshielded twisted		Local Area Network
	pair (UTP) cable.		(LAN) employing
			10BaseT or 100BaseT.
CONSOLE	DB9 plug connector and		The BitStorm 4800
	shielded cable.		Express to one of the
	z	The other connector	following:
			z A terminal or a PC
		depends on the serial
		port on your terminal or	with a terminal
		PC, but normally is a	emulation program, or
		DB9 socket.
	z	The other connector	z A modem.
		depends on the serial
		port on your modem, but
		normally is a DB25 plug.
		A null modem
		(crossover) cable is
		required.

4821-A2-ZN21-30 BitStorm 4800 Express Model 4821-A2 Installation Guide 15