![](/images/new-backgrounds/1118360/11836099x1.webp)
Configuration Using the NMS
2In the Add Ports
3Select or enter the following parameters:
Parameter | Description |
|
|
Reset the MAC rules to | Click in this box to reset MAC rules when the |
default parameters | Submit button is clicked on. |
|
|
Global Configuration IP | Specify Add, Delete, or No Set to add a rule, |
Range Rule | delete a rule, or perform no action when the |
| Submit button is clicked on. |
|
|
Activate | Specify whether the rule you are adding is |
| active. |
|
|
MAC Range | Specify the range of MAC addresses that |
| constitutes a match for this rule. |
|
|
Allow Tag/Untag on | Specify tag or untag. Tag indicates that ingress |
Ingress Pkt. | packets already matched to the MAC Rule must |
| have a VLAN tag to be further considered; |
| packets without a VLAN tag will be dropped. |
| Untag indicates that ingress packets already |
| matched to the MAC Rule cannot have a VLAN |
| tag to be further considered; packets with a |
| VLAN tag will be dropped. |
|
|
VLAN | Specify a VLAN ID range. For each Global |
| MAC Rule, if you selected Tag for Allow Tag/ |
| Untag, the VLAN field should specify either an |
| acceptable single VLAN, or an acceptable |
| VLAN Range, for VLAN tags on ingress |
| packets. If you selected Untag, the VLAN field |
| should specify a single VLAN only if you intend |
| to have a VLAN tag added to packets; if you do |
| not intend to have a VLAN tag added to packets, |
| the VLAN field should be left at the 0 - 0 |
| default. |
|
|
Add VLAN to Ingress | Specify whether the VLAN ID should be added |
Pkt. | to ingress packets. |
|
|
Priority | Specify the priority to be used when adding a |
| configured VLAN ID to a packet. |
|
|
50 | 4929 DSLAM Installation and User’s Guide |