![](/images/new-backgrounds/1118360/118360107x1.webp)
Configuration Using the NMS
Global Advanced Configuration
SNR settings may greatly affect ADSL performance. Do not change SNR settings unless so advised by your service provider.
To configure SNR settings:
1Click on the Global Advanced Config tab. The Global Configuration SNR settings screen appears.
2In the Add Ports
3Select or enter the following parameters:
Parameter | Description |
|
|
SNR (dB) Setting | Specify the upstream and downstream Signal to |
| Noise Ratio settings for the selected ports. |
|
|
Reed Solomon Error | Specify the upstream and downstream |
Correction Settings: | |
Delay |
|
|
|
Reed Solomon Error | Specify the upstream and downstream |
Correction Settings: | |
Correction |
|
|
|
54 | 4929 DSLAM Installation and User’s Guide |