Magnat Audio MC 1 manual Speakers, Antennas, Auxiliary Audio Equipment, Remote Control

Page 15

GB

OPERATIONAL ELEMENTS AND CONNECTIONS - REAR / CONNECTIONS

12

11

10

INSTALLATION

Place the device on a firm, even surface while paying attention to the minimum distances.

SPEAKERS

1

2

3

1 Mains connection

For connecting the supplied mains cable.

2 Power switch

Switches the device on and sets it in the standby mode. If the switch is set to the "OFF" position, the device is disconnected from the mains supply.

3 Speaker terminals

For the connection of stereo speakers with an impedance rating of 4-8 ohms (the correct polarity must be taken into account).

4/5 Digital outputs

For the connection of external devices (e.g. Minidisc recorder) via a coaxial (4) or optical (5) digital output.

6 REC output

Fixed level output e.g. for the connection of a tape recorder.

7 AUX input

This is where an auxiliary CD player or tuner can be connected.

4 5 6 7 8 9

8 TAPE input

For the connection of a cassette recorder or a tape recorder.

9 PHONO input

Low level input with RIAA equalisation for record players with a magnetic system (MM).

10 Earth for phono cable

This is where the earth connection of the phono cable is screwed.

11 AM antenna connection

For connecting the supplied AM loop antenna.

12 FM antenna connection

For connecting the supplied FM indoor antenna or a house antenna.

The stereo speakers (impedance of 4 to 8 ohms) are connected to the rear as follows:

right

left

Only use high-quality audio speaker cables with a conductor cross section of min. 1.5 - 2.5mm². Strip approx. 10 mm from the cables and twist the ends. Loosen the terminal screws one after the other and insert the stripped ends into the holes. Re-tighten the terminal screws. Make sure you pay attention to the correct polarity.

You can also use prefabricated cables with 4mm banana plugs or forked fittings.

ANTENNAS

Connect the FM indoor antenna or a house antenna (provides better reception) to the rear of the device (12), as well as the MW loop antenna (if required).

AUXILIARY AUDIO EQUIPMENT

Auxiliary audio devices (MP3 players, record players, etc.) are to be connected to the appropriate sockets before starting to use the MC 1.

REMOTE CONTROL

When using the remote control aim it at the infrared sensor on the MC 1 (front panel/13).

Sensor

~ 30°

- -

~ 30°

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents SACD/CD Receiver RUS Zubehör InhaltVOR Inbetriebnahme Wichtige SicherheitshinweiseEntsorgungshinweise FM/AM Bedienungselemente UND Anschlüsse Front PanelSacd Bedienungselemente UND Anschlüsse FernbedienungFernbedienung LautsprecherAntennen Zusätzliche AudiogeräteFunktionen DES Tuners Funktionen DES MCRDS Radio Data SYSTEM- Funktionen DES Tuners KlangeinstellungenSLEEP-FUNKTION Technische Daten Weitere Wichtige HinweiseAccessories Table of ContentsImportant Safety Precautions Before StartingInstructions for Disposal Operational Elements and Connections Front Panel Numerical buttons Operational Elements and Connections Remote ControlSearch/Tuning CD operation Input input selectionAuxiliary Audio Equipment Remote ControlSpeakers AntennasFunctions of the MC Functions of the CD PlayerFunctions of the Tuner RDS Radio Data System Functions of the Tuner Sound SettingsSpecifications Sleep FunctionOther Important Information Sommaire AccessoiresAvant LA Mise EN Marche Consignes DE Securite ImportantesInstructions Pour LA Mise AU Rebut Elements DE Commande ET Connexions Panneau Frontal Elements DE Commande ET Connexions Telecommande Appareils Audio Supplementaires TelecommandeHAUT-PARLEURS AntennesFonctions DU Tuner Fonctions DU MCReglages DE LA Sonorite RDS Radio Data Service Fonctions DU TunerFonction Sleep Autres Consignes ImportantesLine in panneau frontal Indice AccessoriPrima Della Messa in Funzione Importanti Avvertenze DI SicurezzaAvvertenze PER LO Smaltimento Elementi DI Comando ED Attacchi Pannello Frontale Tasti numerici Skip/Preset Funzionamento CDElementi DI Comando ED Attacchi Telecomando Input selezione ingressoTelecomando AltoparlantiAntenne Dispositivi Audio SupplementariFunzioni DEL Sintonizzatore Funzioni DEL MCFunzioni RDS Radio Data System DEL Sintonizzatore Impostazioni DEL SuonoFunzione Sleep Dati Tecnici Ulteriori Avvertenze ImportantiÍndice AccessoriosAntez DE Empezar Precauciones Importantes DE SeguridadInstrucciones DE Eliminación Elementos Operativos Y Conexiones Panel Frontal Teclado numérico En el modo CD Search/Tuning En el modo CDElementos Operativos Y Conexiones Control Remoto Input selección de entradaControl Remoto AltavocesAntenas Equipo DE Sonido AuxiliarFunciones DEL MC Funciones DEL Reproductor DE CDFunciones DEL Sintonizador Función Sleep Configuración DE SonidoFunciones RDS Servicio DE Datos DE Radio DEL SintonizadorEspecificaciones Otra Información ImportanteRUS 10 cm RUS RUS 12 11 Play time RDS RUS Garantiekarte Warranty Card

MC 1 specifications

Magnat Audio MC 1 is a remarkable multimedia speaker system that stands out in the crowded audio market. Designed for both audiophiles and casual listeners, the MC 1 combines cutting-edge technology with exceptional build quality to deliver an unparalleled listening experience.

One of the key features of the Magnat Audio MC 1 is its powerful sound performance. Equipped with two 3” full-range drivers and a robust 5.25” bass driver, this speaker system ensures a well-balanced sound reproduction across the entire audio spectrum. The MC 1’s 2-way design allows for precise sound staging, making it perfect for music enthusiasts who appreciate clarity in their audio playback.

Innovation plays a significant role in the MC 1's design. The speaker employs advanced technologies, such as the proprietary Wave Guide technology, which enhances the dispersion of sound. This means listeners can enjoy consistent audio quality, regardless of their position in relation to the speakers. The incorporation of high-quality crossover components further ensures seamless integration between the drivers, resulting in a smooth and cohesive sound profile.

The aesthetics of the Magnat Audio MC 1 are as impressive as its performance. Its sleek and modern design is highlighted by a premium wood finish, making it an elegant addition to any living space. The compact dimensions of the MC 1 make it versatile and easy to position, whether on a bookshelf or table.

Connectivity options are abundant in the MC 1, catering to a variety of audio sources. It features Bluetooth compatibility, allowing users to stream music directly from their smartphones, tablets, or computers without the hassle of wired connections. Additionally, the speaker system includes RCA and AUX inputs, making it suitable for connecting to vintage audio equipment or modern devices.

In terms of usability, the Magnat Audio MC 1 is designed to be user-friendly. It comes with an intuitive remote control that allows for easy operation from a distance. The ability to adjust volume levels, change inputs, and even toggle between sound modes provides flexibility tailored to personal preferences.

Durability is another hallmark of the Magnat MC 1, built with high-quality materials designed to withstand daily use while maintaining its acoustic performance over time.

In conclusion, the Magnat Audio MC 1 excels in delivering high-quality sound, innovative technologies, and an attractive design, making it a top choice for anyone seeking an impressive audio experience. Whether it’s for casual listening or enjoying high-fidelity sound, the MC 1 stands ready to accommodate diverse audio needs.
Top Page Image Contents