Magnat Audio MC 1 manual Sleep Function, Other Important Information, Specifications

Page 18

GB

SLEEP FUNCTION

This function enables you to set a time after which the device will switch off automatically and change to the standby mode.

Press the SLEEP button on the remote control. The following appears in the display:

Press the SLEEP button again and the following will be displayed:

90min. Sleep mode

You can reduce the switch-off time in 10-minute intervals by using the SLEEP button. The sleep mode is deactivated at SLEEP 00.

After the time has been set the display automatically reverts back to its previous status. However, confirmation that the sleep mode is active is visible in the display.

OTHER IMPORTANT INFORMATION

Headphones

You can connect headphones with a 3.5 mm stereo jack to the socket located on the front of the MC 1.

Before doing this set the volume to VOL 00.

The sound from the speakers is automatically disconnected when headphones are inserted.

Please note that listening to music at high volume via headphones can cause irreparable damage to your hearing!

Line in (front panel)

• This is used for connecting an audio source with a 3.5 mm stereo jack.

The other analogue connections on the rear of the MC 1 are designed for RCA cables.

If you should have any further queries, please refer to the operating instructions for the respective device.

Phono input

The MC 1 has a high quality phono preamplifier with RIAA equalisation. Only record players with a magnetic system (MM) or a moving coil system with high level output (high output MC) may be connected here.

Most of these devices have an additional earth wire. Please connect this to the rear of the MC 1 using the screw (10) in order to minimise the degree of humming.

SPECIFICATIONS

Amplifier

 

 

 

 

Power output:

 

 

 

 

Rated power

20 Hz – 20 kHz, THD < 1.0%, 4 ohm

2 x

80 w

 

20 Hz – 20 kHz, THD < 1.0%, 8 ohm

2 x

60 w

Pulse power

1 kHz, 4 ohm

 

2 x 150 w

Frequency response:

5 Hz – 100 kHz (-3.0 dB)

 

 

 

 

 

 

20 Hz – 20 kHz (-0.5 dB)

 

 

Phono

20 Hz – 20 kHz (-1.0 dB)

 

 

Signal to noise ratio:

 

 

 

 

CD/Aux/Line/Tape

95 dB

 

 

 

Phono

85 dB

 

 

 

Input sensitivity/impedance:

 

 

 

 

AUX/Line/Tape

250 mV/33 kOhm

 

 

 

Phono

5 mV/47 kOhm

 

 

 

Equalisation:

 

 

 

 

Bass

±10 dB/100 Hz

 

 

 

Treble

±10 dB/ 10 kHz

 

 

 

FM Tuner

 

 

 

 

Frequency response:

87.5 – 108 MHz

 

 

 

Signal to noise ratio:

 

 

 

 

Mono

75 dB

 

 

 

Stereo

70 dB

 

 

 

Harmonic distortion:

 

 

 

 

Mono

<0.25%

 

 

 

Stereo

<0.50%

 

 

 

AM Tuner

 

 

 

 

Frequency response:

531-1602 MHz

 

 

 

Signal to noise ratio:

40 dB

 

 

 

Miscellaneous

 

 

 

 

Dimensions (wxhxd):

360 x 110 x 400 mm

 

 

 

Weight:

8.9 kg

 

 

 

Electricity consumption::

 

 

 

 

Max

200 W

 

 

 

Standby

1.4 W

Subject to technical change.

18

Image 18
Contents SACD/CD Receiver RUS Inhalt ZubehörVOR Inbetriebnahme Wichtige SicherheitshinweiseEntsorgungshinweise Bedienungselemente UND Anschlüsse Front Panel FM/AMBedienungselemente UND Anschlüsse Fernbedienung SacdZusätzliche Audiogeräte LautsprecherAntennen FernbedienungFunktionen DES MC Funktionen DES TunersRDS Radio Data SYSTEM- Funktionen DES Tuners KlangeinstellungenSLEEP-FUNKTION Weitere Wichtige Hinweise Technische DatenTable of Contents AccessoriesImportant Safety Precautions Before StartingInstructions for Disposal Operational Elements and Connections Front Panel Input input selection Operational Elements and Connections Remote ControlSearch/Tuning CD operation Numerical buttonsAntennas Remote ControlSpeakers Auxiliary Audio EquipmentFunctions of the MC Functions of the CD PlayerFunctions of the Tuner Sound Settings RDS Radio Data System Functions of the TunerSpecifications Sleep FunctionOther Important Information Accessoires SommaireAvant LA Mise EN Marche Consignes DE Securite ImportantesInstructions Pour LA Mise AU Rebut Elements DE Commande ET Connexions Panneau Frontal Elements DE Commande ET Connexions Telecommande Antennes TelecommandeHAUT-PARLEURS Appareils Audio SupplementairesFonctions DU MC Fonctions DU TunerRDS Radio Data Service Fonctions DU Tuner Reglages DE LA SonoriteFonction Sleep Autres Consignes ImportantesLine in panneau frontal Accessori IndicePrima Della Messa in Funzione Importanti Avvertenze DI SicurezzaAvvertenze PER LO Smaltimento Elementi DI Comando ED Attacchi Pannello Frontale Input selezione ingresso Skip/Preset Funzionamento CDElementi DI Comando ED Attacchi Telecomando Tasti numericiDispositivi Audio Supplementari AltoparlantiAntenne TelecomandoFunzioni DEL MC Funzioni DEL SintonizzatoreFunzioni RDS Radio Data System DEL Sintonizzatore Impostazioni DEL SuonoFunzione Sleep Ulteriori Avvertenze Importanti Dati TecniciAccessorios ÍndiceAntez DE Empezar Precauciones Importantes DE SeguridadInstrucciones DE Eliminación Elementos Operativos Y Conexiones Panel Frontal Input selección de entrada Search/Tuning En el modo CDElementos Operativos Y Conexiones Control Remoto Teclado numérico En el modo CDEquipo DE Sonido Auxiliar AltavocesAntenas Control RemotoFunciones DEL MC Funciones DEL Reproductor DE CDFunciones DEL Sintonizador Sintonizador Configuración DE SonidoFunciones RDS Servicio DE Datos DE Radio DEL Función SleepOtra Información Importante EspecificacionesRUS 10 cm RUS RUS 12 11 Play time RDS RUS Garantiekarte Warranty Card

MC 1 specifications

Magnat Audio MC 1 is a remarkable multimedia speaker system that stands out in the crowded audio market. Designed for both audiophiles and casual listeners, the MC 1 combines cutting-edge technology with exceptional build quality to deliver an unparalleled listening experience.

One of the key features of the Magnat Audio MC 1 is its powerful sound performance. Equipped with two 3” full-range drivers and a robust 5.25” bass driver, this speaker system ensures a well-balanced sound reproduction across the entire audio spectrum. The MC 1’s 2-way design allows for precise sound staging, making it perfect for music enthusiasts who appreciate clarity in their audio playback.

Innovation plays a significant role in the MC 1's design. The speaker employs advanced technologies, such as the proprietary Wave Guide technology, which enhances the dispersion of sound. This means listeners can enjoy consistent audio quality, regardless of their position in relation to the speakers. The incorporation of high-quality crossover components further ensures seamless integration between the drivers, resulting in a smooth and cohesive sound profile.

The aesthetics of the Magnat Audio MC 1 are as impressive as its performance. Its sleek and modern design is highlighted by a premium wood finish, making it an elegant addition to any living space. The compact dimensions of the MC 1 make it versatile and easy to position, whether on a bookshelf or table.

Connectivity options are abundant in the MC 1, catering to a variety of audio sources. It features Bluetooth compatibility, allowing users to stream music directly from their smartphones, tablets, or computers without the hassle of wired connections. Additionally, the speaker system includes RCA and AUX inputs, making it suitable for connecting to vintage audio equipment or modern devices.

In terms of usability, the Magnat Audio MC 1 is designed to be user-friendly. It comes with an intuitive remote control that allows for easy operation from a distance. The ability to adjust volume levels, change inputs, and even toggle between sound modes provides flexibility tailored to personal preferences.

Durability is another hallmark of the Magnat MC 1, built with high-quality materials designed to withstand daily use while maintaining its acoustic performance over time.

In conclusion, the Magnat Audio MC 1 excels in delivering high-quality sound, innovative technologies, and an attractive design, making it a top choice for anyone seeking an impressive audio experience. Whether it’s for casual listening or enjoying high-fidelity sound, the MC 1 stands ready to accommodate diverse audio needs.