Avocent 1515, 2015, 1415 Installing the AutoView Switch, To install the 1U switch mounting bracket

Page 20

8AutoView 1415/1515/2015 Switch Installer/User Guide

Figure 2.1: AutoView Switch Horizontal Installation

CAUTION: Rack Loading - Overloading or uneven loading of racks may result in shelf or rack failure, causing damage to equipment and possible personal injury. Do not exceed your rack load rating.

To install the 1U switch mounting bracket:

1.Remove the first two screws on each side of the switch.

2.Line up the holes in the “long side” of the kit’s side brackets with the screw holes in the switch.

3.With a Phillips screwdriver, fasten the mounting brackets to the switch using two screws on each side.

4.Attach four cage nuts or clip nuts to the rack mounting flange of the rack cabinet so that the nut is positioned on the inside of the rack.

NOTE: Nuts are not included with the rack mount kit.

5.Mount the switch assembly to the rack cabinet by matching the holes in the “short side” of each bracket to an appropriate set of matching holes on your rack cabinet.

6.Next, insert the combination hex head screws through the slots in the bracket and the holes in the mounting rail, then into the cage nuts or clip nuts.

Installing the AutoView Switch

Plug the supplied power cord into the back of the appliance and then into an appropriate power source. Figure 2.2 illustrates one possible configuration for your AutoView switch. See the following detailed set of procedures to successfully install your appliance.

Page 19 Page 21
Image 20
Page 19 Page 21
Contents AutoView Switch USA Notification Canadian Notification AutoView→ Switch 1415/1515/2015 Power On Page Page Table of Contents Changing Your Switch Mode List of Figures User Setup Menu Administrator Only List of Tables AutoView 1415/1515/2015 Switch Installer/User Guide Multiplatform support Features and BenefitsAvriq Intelligent Module Two-User Share Mode Oscar graphical user interfaceSecurity Operation modesLocal user accounts Integrated Access CablesCascading expansion Safety Precautions Example of an AutoView Switch ConfigurationRack mount safety considerations AutoView 1415/1515/2015 Switch Installer/User Guide Rack Mounting Your AutoView Switch Supplied with the AutoView switchGetting Started Additional items neededInstalling the AutoView Switch To install the 1U switch mounting bracketInstallation Connecting Users Cascading AutoView SwitchesTo connect a server using an Avriq module To connect a server using an IAC moduleTo cascade multiple AutoView switches Adding Legacy Switches Legacy Switch Support Legacy Product Model NumbersAutoView 2015 Switch Configuration with Legacy KVM Switches Local Analog User a Avriq Module Setting Up Your AutoView Switching System To add a legacy KVM switchAutoView 1415/1515/2015 Switch Installer/User Guide Viewing and Selecting Ports and Servers To access the Main dialog boxControlling Your System at the Analog Ports To select servers Viewing the status of your switchSelecting servers Navigating the Oscar Interface Alt+X Configuring Oscar Interface Menus To access the Setup menuTo access the Names dialog box Assigning server namesTo assign names to servers Names Dialog BoxTo assign a device type To access the Devices dialog boxAssigning device types To access the Menu dialog box Changing the display behaviorSetting the keyboard country code To choose the default display order of serversTo set up key sequences to launch the Oscar interface To set a Screen Delay Time for the Oscar interfaceTo select a language Selecting a languageTo change the keyboard country code To access the Flag dialog box Controlling the status flagSetting console security To determine how the status flag is displayedTo password protect your console To access the Security dialog boxTo set or change the password To remove password protection from your console To enable local user accountsTo disable local user accounts Admin user only To enable the screen saver mode with no password protectionTo exit the screen saver mode Displaying Version Information To turn off the screen saverTo immediately turn on the screen saver To display version information16 Target Selection Dialog Box Admin Scanning Your System To decommission an Avriq moduleTo remove a server from the scan list To start the Scan ModeTo add servers to the scan list Running System Diagnostics To cancel Scan ModeTo run diagnostic tests Diagnostic Test Details DescriptionTo access the Broadcast dialog box Broadcasting to ServersTo broadcast to selected servers 23 Broadcast Dialog BoxTo turn broadcasting off Changing Your Switch ModeTo access the Switch dialog box Setting the Share Mode feature To enable Share ModeUsing Administrator Privileges To access the User Setup screen administrator onlyTo edit a user User Setup menu functions administrator onlyUser Edit menu administrator only User Access menu administrator only User Edit Menu Administrator OnlyUser Setup menu Delete administrator only Appendix a Flash Upgrades Upgrading the AutoView switchItems needed for the upgrade To upgrade firmwareTo simultaneously upgrade multiple Avriq modules Upgrading the Avriq module firmwareAppendices Appendix B Technical Specifications Analog Port SetsSafety and EMC Approvals and Markings Appendix C Sun Advanced Key Emulation Appendices To resolve an issue Appendix D Technical SupportPage 590-644-501C
Related manuals
Manual 1 pages 37.76 Kb

1515, 1415, 2015 specifications

Avocent, a recognized leader in the IT management space, offers a range of high-performance KVM (Keyboard, Video, Mouse) switches that cater to various enterprise demands. The Avocent 1415, 2015, and 1515 models are designed to provide seamless control over multiple computers from a single interface, enhancing efficiency and managing diverse IT environments.

The Avocent 1415 is a compact KVM switch that supports both USB and PS/2 connectivity, allowing users to connect a wide range of devices without the need for additional adapters. It features a maximum resolution of 1920x1200, ensuring clear and crisp display quality, which is essential for detailed tasks. The 1415 is particularly valued for its hot-plug capability, enabling users to add or remove computers without interrupting operation, thus sustaining workflow and productivity.

The Avocent 2015 builds on these features, introducing enhanced video support with a higher resolution capacity, accommodating up to 4K resolutions. This makes it ideal for graphic-intensive tasks and environments that require superior display quality. Additionally, the 2015 model integrates advanced security features, such as user authentication and access controls, ensuring that sensitive data remains protected. The unit also supports cross-platform compatibility, making it versatile for diverse IT setups.

The Avocent 1515 represents the pinnacle of the series, incorporating advanced technologies such as dual-link DVI support and robust audio switching capabilities. Users can enjoy a more immersive experience with high-definition audio, making the 1515 suitable for multimedia environments where sound quality is as crucial as video quality. Furthermore, the 1515 boasts enhanced management features, including web-based access for remote control and monitoring, which facilitates easier management of multiple systems across various locations.

All three models prioritize reliability and user experience, featuring intuitive control interfaces that simplify navigation. Built with durable materials, they are designed for long-term use in demanding environments. The common characteristic of these Avocent switches is their ability to streamline IT management, reduce operational costs, and improve user productivity through advanced features and robust technologies. Whether in data centers, corporate offices, or remote locations, the Avocent 1415, 2015, and 1515 series offer solid solutions for efficient and secure KVM management.
Top Page Image Contents