Avocent 1415, 2015 To log in to your console, To remove password protection from your console

Page 43

Chapter 3: Basic Operations

31

 

 

3.Type the number of minutes for Inactivity Time (from 1 to 99) to delay activation of password protection and the screen saver feature.

4.For Mode, select Energy if your monitor is ENERGY STAR® compliant; otherwise select Screen.

CAUTION: Monitor damage can result from the use of Energy mode with monitors not compliant with

ENERGY STAR.

5.(Optional) Click Test to activate the screen saver test which lasts 10 seconds then returns you to the Security dialog box.

6.Click OK.

To log in to your console:

1.Press any key or move the mouse.

2.The Password dialog box displays. Type your password, then click OK.

3.The Main dialog box displays if the password was entered properly.

To remove password protection from your console:

1.From the Main dialog box, click Setup - Security; the Password dialog box displays. Type your password, then click OK.

2.In the Security dialog box, single-click and press Enter or double-click in the New box. Leave the box blank. Press Enter.

3.Single-click and press Enter or double-click in the Repeat box. Leave the box blank. Press Enter.

4.Click OK to eliminate your password.

To enable local user accounts:

1.Click the Enable Local User Accounts checkbox.

2.Click OK. See Chapter 4 for more information on setting up local user accounts.

To disable local user accounts (Admin user only):

1.Click Enable Local User Accounts to uncheck the box and disable this option.

2.Click OK.

To enable the screen saver mode with no password protection:

1.If your console does not require a password to gain access to the Security dialog box, proceed to step 2.

-or-

If your console is password protected, see the previous procedure, then go to step 2.

2.Select Enable Screen Saver.

3.Type the number of minutes for Inactivity Time (from 1 to 99) to delay activation of the screen saver.

Page 42 Page 44
Image 43
Page 42 Page 44
Contents AutoView Switch USA Notification Canadian Notification AutoView→ Switch 1415/1515/2015 Power On Page Page Table of Contents Changing Your Switch Mode List of Figures User Setup Menu Administrator Only List of Tables AutoView 1415/1515/2015 Switch Installer/User Guide Avriq Intelligent Module Features and BenefitsMultiplatform support Operation modes Two-User Share ModeOscar graphical user interface SecurityCascading expansion Integrated Access CablesLocal user accounts Example of an AutoView Switch Configuration Safety PrecautionsRack mount safety considerations AutoView 1415/1515/2015 Switch Installer/User Guide Additional items needed Rack Mounting Your AutoView SwitchSupplied with the AutoView switch Getting StartedTo install the 1U switch mounting bracket Installing the AutoView SwitchInstallation To connect a server using an IAC module Connecting UsersCascading AutoView Switches To connect a server using an Avriq moduleTo cascade multiple AutoView switches Legacy Switch Support Legacy Product Model Numbers Adding Legacy SwitchesAutoView 2015 Switch Configuration with Legacy KVM Switches Local Analog User a Avriq Module To add a legacy KVM switch Setting Up Your AutoView Switching SystemAutoView 1415/1515/2015 Switch Installer/User Guide Controlling Your System at the Analog Ports To access the Main dialog boxViewing and Selecting Ports and Servers Selecting servers Viewing the status of your switchTo select servers Navigating the Oscar Interface Alt+X To access the Setup menu Configuring Oscar Interface MenusAssigning server names To access the Names dialog boxNames Dialog Box To assign names to serversAssigning device types To access the Devices dialog boxTo assign a device type Changing the display behavior To access the Menu dialog boxTo set a Screen Delay Time for the Oscar interface Setting the keyboard country codeTo choose the default display order of servers To set up key sequences to launch the Oscar interfaceTo change the keyboard country code Selecting a languageTo select a language Controlling the status flag To access the Flag dialog boxTo determine how the status flag is displayed Setting console securityTo set or change the password To access the Security dialog boxTo password protect your console To enable the screen saver mode with no password protection To remove password protection from your consoleTo enable local user accounts To disable local user accounts Admin user onlyTo exit the screen saver mode To display version information Displaying Version InformationTo turn off the screen saver To immediately turn on the screen saver16 Target Selection Dialog Box Admin To decommission an Avriq module Scanning Your SystemTo add servers to the scan list To start the Scan ModeTo remove a server from the scan list To cancel Scan Mode Running System DiagnosticsDiagnostic Test Details Description To run diagnostic testsBroadcasting to Servers To access the Broadcast dialog box23 Broadcast Dialog Box To broadcast to selected serversTo access the Switch dialog box Changing Your Switch ModeTo turn broadcasting off To enable Share Mode Setting the Share Mode featureTo access the User Setup screen administrator only Using Administrator PrivilegesUser Edit menu administrator only User Setup menu functions administrator onlyTo edit a user User Edit Menu Administrator Only User Access menu administrator onlyUser Setup menu Delete administrator only To upgrade firmware Appendix a Flash UpgradesUpgrading the AutoView switch Items needed for the upgradeUpgrading the Avriq module firmware To simultaneously upgrade multiple Avriq modulesAppendices Analog Port Sets Appendix B Technical SpecificationsSafety and EMC Approvals and Markings Appendix C Sun Advanced Key Emulation Appendices Appendix D Technical Support To resolve an issuePage 590-644-501C
Related manuals
Manual 1 pages 37.76 Kb

1515, 1415, 2015 specifications

Avocent, a recognized leader in the IT management space, offers a range of high-performance KVM (Keyboard, Video, Mouse) switches that cater to various enterprise demands. The Avocent 1415, 2015, and 1515 models are designed to provide seamless control over multiple computers from a single interface, enhancing efficiency and managing diverse IT environments.

The Avocent 1415 is a compact KVM switch that supports both USB and PS/2 connectivity, allowing users to connect a wide range of devices without the need for additional adapters. It features a maximum resolution of 1920x1200, ensuring clear and crisp display quality, which is essential for detailed tasks. The 1415 is particularly valued for its hot-plug capability, enabling users to add or remove computers without interrupting operation, thus sustaining workflow and productivity.

The Avocent 2015 builds on these features, introducing enhanced video support with a higher resolution capacity, accommodating up to 4K resolutions. This makes it ideal for graphic-intensive tasks and environments that require superior display quality. Additionally, the 2015 model integrates advanced security features, such as user authentication and access controls, ensuring that sensitive data remains protected. The unit also supports cross-platform compatibility, making it versatile for diverse IT setups.

The Avocent 1515 represents the pinnacle of the series, incorporating advanced technologies such as dual-link DVI support and robust audio switching capabilities. Users can enjoy a more immersive experience with high-definition audio, making the 1515 suitable for multimedia environments where sound quality is as crucial as video quality. Furthermore, the 1515 boasts enhanced management features, including web-based access for remote control and monitoring, which facilitates easier management of multiple systems across various locations.

All three models prioritize reliability and user experience, featuring intuitive control interfaces that simplify navigation. Built with durable materials, they are designed for long-term use in demanding environments. The common characteristic of these Avocent switches is their ability to streamline IT management, reduce operational costs, and improve user productivity through advanced features and robust technologies. Whether in data centers, corporate offices, or remote locations, the Avocent 1415, 2015, and 1515 series offer solid solutions for efficient and secure KVM management.
Top Page Image Contents