Avocent 2015, 1415, 1515 Setting Up Your AutoView Switching System, To add a legacy KVM switch

Page 27

Chapter 2: Installation

15

 

 

To add a legacy KVM switch:

1.Mount the primary KVM switch into your rack cabinet.

2.Connect one end of a CAT 5 cable to an available port on the back of your AutoView switch.

3.Attach the keyboard, monitor and mouse connectors of the AVRIQ module to a user port on your cascaded switch.

4.Attach the other end of the CAT 5 cabling to the RJ-45 connector on the AVRIQ module.

5.Connect the servers to your cascaded switch according to the instructions included with the switch.

6.Power cycle the cascaded switch to enable its local user port to recognize the AVRIQ module.

7.Repeat steps 2 to 6 for all cascaded switches you wish to attach to your system.

To connect local peripherals:

1.Select the keyboard, monitor and mouse to be connected to local user A.

2.Locate the port set labeled A on the back of the switch. Connect these peripherals to their respective ports.

3.For the multiuser, 16-port AutoView switch, repeat steps 1 and 2 for the local analog port set labeled B.

- or -

For the AutoView 1415/1515 switch, proceed to step 4.

4.Bundle and label the cables for easy identification.

Setting Up Your AutoView Switching System

The AutoView switching system enables you to auto detect and configure each port on your appliance. Chapter 3 provides detailed instructions on name customization and OSCAR interface setup and configuration.

Page 26 Page 28
Image 27
Page 26 Page 28
Contents AutoView Switch USA Notification Canadian Notification AutoView→ Switch 1415/1515/2015 Power On Page Page Table of Contents Changing Your Switch Mode List of Figures User Setup Menu Administrator Only List of Tables AutoView 1415/1515/2015 Switch Installer/User Guide Features and Benefits Avriq Intelligent ModuleMultiplatform support Operation modes Two-User Share ModeOscar graphical user interface SecurityIntegrated Access Cables Cascading expansionLocal user accounts Example of an AutoView Switch Configuration Safety PrecautionsRack mount safety considerations AutoView 1415/1515/2015 Switch Installer/User Guide Additional items needed Rack Mounting Your AutoView SwitchSupplied with the AutoView switch Getting StartedTo install the 1U switch mounting bracket Installing the AutoView SwitchInstallation To connect a server using an IAC module Connecting UsersCascading AutoView Switches To connect a server using an Avriq moduleTo cascade multiple AutoView switches Legacy Switch Support Legacy Product Model Numbers Adding Legacy SwitchesAutoView 2015 Switch Configuration with Legacy KVM Switches Local Analog User a Avriq Module To add a legacy KVM switch Setting Up Your AutoView Switching SystemAutoView 1415/1515/2015 Switch Installer/User Guide To access the Main dialog box Controlling Your System at the Analog PortsViewing and Selecting Ports and Servers Viewing the status of your switch Selecting serversTo select servers Navigating the Oscar Interface Alt+X To access the Setup menu Configuring Oscar Interface MenusAssigning server names To access the Names dialog boxNames Dialog Box To assign names to serversTo access the Devices dialog box Assigning device typesTo assign a device type Changing the display behavior To access the Menu dialog boxTo set a Screen Delay Time for the Oscar interface Setting the keyboard country codeTo choose the default display order of servers To set up key sequences to launch the Oscar interfaceSelecting a language To change the keyboard country codeTo select a language Controlling the status flag To access the Flag dialog boxTo determine how the status flag is displayed Setting console securityTo access the Security dialog box To set or change the passwordTo password protect your console To enable the screen saver mode with no password protection To remove password protection from your consoleTo enable local user accounts To disable local user accounts Admin user onlyTo exit the screen saver mode To display version information Displaying Version InformationTo turn off the screen saver To immediately turn on the screen saver16 Target Selection Dialog Box Admin To decommission an Avriq module Scanning Your SystemTo start the Scan Mode To add servers to the scan listTo remove a server from the scan list To cancel Scan Mode Running System DiagnosticsDiagnostic Test Details Description To run diagnostic testsBroadcasting to Servers To access the Broadcast dialog box23 Broadcast Dialog Box To broadcast to selected serversChanging Your Switch Mode To access the Switch dialog boxTo turn broadcasting off To enable Share Mode Setting the Share Mode featureTo access the User Setup screen administrator only Using Administrator PrivilegesUser Setup menu functions administrator only User Edit menu administrator onlyTo edit a user User Edit Menu Administrator Only User Access menu administrator onlyUser Setup menu Delete administrator only To upgrade firmware Appendix a Flash UpgradesUpgrading the AutoView switch Items needed for the upgradeUpgrading the Avriq module firmware To simultaneously upgrade multiple Avriq modulesAppendices Analog Port Sets Appendix B Technical SpecificationsSafety and EMC Approvals and Markings Appendix C Sun Advanced Key Emulation Appendices Appendix D Technical Support To resolve an issuePage 590-644-501C
Related manuals
Manual 1 pages 37.76 Kb

1515, 1415, 2015 specifications

Avocent, a recognized leader in the IT management space, offers a range of high-performance KVM (Keyboard, Video, Mouse) switches that cater to various enterprise demands. The Avocent 1415, 2015, and 1515 models are designed to provide seamless control over multiple computers from a single interface, enhancing efficiency and managing diverse IT environments.

The Avocent 1415 is a compact KVM switch that supports both USB and PS/2 connectivity, allowing users to connect a wide range of devices without the need for additional adapters. It features a maximum resolution of 1920x1200, ensuring clear and crisp display quality, which is essential for detailed tasks. The 1415 is particularly valued for its hot-plug capability, enabling users to add or remove computers without interrupting operation, thus sustaining workflow and productivity.

The Avocent 2015 builds on these features, introducing enhanced video support with a higher resolution capacity, accommodating up to 4K resolutions. This makes it ideal for graphic-intensive tasks and environments that require superior display quality. Additionally, the 2015 model integrates advanced security features, such as user authentication and access controls, ensuring that sensitive data remains protected. The unit also supports cross-platform compatibility, making it versatile for diverse IT setups.

The Avocent 1515 represents the pinnacle of the series, incorporating advanced technologies such as dual-link DVI support and robust audio switching capabilities. Users can enjoy a more immersive experience with high-definition audio, making the 1515 suitable for multimedia environments where sound quality is as crucial as video quality. Furthermore, the 1515 boasts enhanced management features, including web-based access for remote control and monitoring, which facilitates easier management of multiple systems across various locations.

All three models prioritize reliability and user experience, featuring intuitive control interfaces that simplify navigation. Built with durable materials, they are designed for long-term use in demanding environments. The common characteristic of these Avocent switches is their ability to streamline IT management, reduce operational costs, and improve user productivity through advanced features and robust technologies. Whether in data centers, corporate offices, or remote locations, the Avocent 1415, 2015, and 1515 series offer solid solutions for efficient and secure KVM management.
Top Page Image Contents