Asante Technologies FS4008E/FS4016E, FS4002E/FS4004E user manual

Installation

◆Note: The FS4004E does not have a power switch. The FS4002E is automatically powered on as soon as the power cord is connected to the FS4004E and to a power outlet.

FS4008E

The front panel of the FS4008E consists of eight 10/100 Mbps ports, one uplink button switch, and LED indicators. See Figure 2-5.

Uplink Port (Selector)

FRIENDLYNET

8-port 10/100 Fast Ethernet Switch

FS4008E

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

Power

Switched 10/100Mbps Ports

or

Uplink

LEDs Eight 10/100 Ports

Figure 2-5 FriendlyNet FS4008E front panel

The back panel of the FS4008E contains a100-240Vac power connector. It also contains a Ports switch consisting of nine DIP switches. (One of the DIP switches, marked N/A, is not used.) The DIP switches set the mode of operation for each port, either Half Duplex or Full NWay.

AC Power Connector

1 2 3 4 5 6 7 8 N/A

115/230V AC Input

Port DIP Switches

Figure 2-6 FriendlyNet FS4008E back panel

◆Note: The FS4008E does not have a power switch. The FS4008E is automatically powered on as soon as the power cord is connected to the FS4008E and to a power outlet.

FS4016E

The front panel of the FS4016E contains sixteen 10/100Mbps ports, one uplink switch button, and LED indicators. See Figure 2-7.

Page 2-4