Asante Technologies FS4008E/FS4016E, FS4002E/FS4004E Mounting Configurations, Voltage Requirements

Installation

Voltage Requirements

Check the AC power line voltage used in your area. The AC power adapter included with the FS4002E and FS4004E Switches must match the utility power.

The FS4008E and FS4016E are equipped with an internal power supply. Power sensing is automatic for all international utility power. There is no power switch on either of these units, they are powered on when the power cord is connected between the Switch and the power outlet.

Mounting Configurations

This section describes how to mount the Switch on a desktop or a wall. It also explains how to install the Switch in an equipment rack.

Desktop Mounting

To mount the Switch on a desktop or shelf:

1 Attach the four rubber feet (supplied) to the bottom of each corner on the Switch. See Figure 2-9.

1 2 3 4 5 6 7 8

Power

F
RIENDLYNET
8-port 10/100	Fast Ethernet Switch
1	2	3	4	5
					6	7
							8
			Switched 10/100Mbps Ports

or

Uplink

FS4008E

Figure 2-9 Desktop mounting

2 Place the Switch on a flat, stable, horizontal desktop or shelf.

Make sure you allow enough ventilation space between the Switch and surrounding objects.

The Switch is ready for network connections.

Page 2-6