Atlantis Land ATLMMR MNE01 Why can’t I set up IP Filter function in GUI?, Solution, Answer

Page 37

For example, set IP LAN to 202.39.52.190 255.255.255.0

What can I do if PCs or workstations in the LAN can’t be connected to Internet after setting public IP address?

Solution. First, Please make sure that the public IP address you set is a legal public IP address, and then check that the public IP address has not occupied by other users. Second, make sure the IP address of each server is static and the IP Address/ Netmask/ Gateway information is completed.

And to make sure all PC is connects router with correct ISP.

Why can’t I set up IP Filter function in GUI?

Answer. Due to the consideration of security, you only can set up Profile in GUI Mode, and for the LAN; it only can be revised under the CLI Mode.

Solution. Connect the PC to the device with a null modem type cable and enter CLI mode to start IP Filtering by Telnet or Hyper-terminal.

What should I do if the Firmware upgraded fail in the device, and it affects me have trouble to get into CLI & GUI screen?

Answer. It will go through the process of Vector->Boot Code->App Code once its power on, the CLI can be used to update Firmware as long as the Boot Code doesn’t expired.

Solution.

1.Open Hyper terminal

2.Make sure baud rate is 19200,n, 8,1,none

3.Connect the cable with both Com Port and Console Port

4.Turn on the router

5.Choice the connection speed, then you can update the Firmware by delivery the chosen Firmware file. How can I get into Router what if I forgot the password?

Answer.

If you forget the password, you can clean the password first, but all configuration will be disappeared once the password cleaned.

Solution.

1. To get into Hyper Terminal first.

34

Image 37
Contents Isdn Router AtlantisLand spa Table of Contents Introduction Package contentsAn overview of the Isdn Router Isdn Router Application Isdn Router FeaturesFront LEDs Using the Isdn RouterCabling Rear portsPage Before Configuration ConfigurationSelect the Obtain an IP address automatically radio button Configuring PC in Windows NT4.0 Configuring PC in Windows Using Different Browsers for Isdn Router Configuring with GUI programSelect the Obtain an IP address automatically Netscape NavigatorBasic Internet Access Configuration PasswordCustomize User Interface Click Apply and Test Internet Access with Advanced ConfigurationPage IP Configuration for Internet Access IP Routing Table Page Click Apply IP Address Translation ConfigurationAdd or Edit IP Address Translation Click Apply Delete a Set of IP Address Translation Static Dhcp ConfigurationClick Edit Click Delete Delete a Set of static private IP addressRemote Office Access by Isdn Remote ConfigurationRemote Phone Number My System Name My System Password Remote Sub-Address Advanced Options for Remote Office Access ProfilesCaller ID Number Remote IP Address Remote IP Netmask Enable Bridging Enable IPSelect Connection Profiles in the Menu Window Deleting Remote Office Access ProfileConfiguring a Dial-in User Profile Dial-in User Access ConfigurationPage Packet Filtering Deleting Dial-in User ProfilesSelect Connection Profiles from the Menu Window Page How to Reset How to Upgrade the FirmwareManagement What if I Forget the Password? How to Change Isdn Router Manager PasswordCurrent Password New Password Confirm Password Click Submit What is NAT? TroubleshootingHow do I set up the Idle Time? How many rules can be used in IP Filtering function?Why can’t I use ICQ software under the device? Why does the configuration lost from previous usage?What’s Data over Voice Channel? Solution Why can’t I set up IP Filter function in GUI?Answer Answer