Scenario 6: Router Mode Configuration with Classical IP over ATM (RFC1577)
WAN Configuration |
|
Default Gateway | Provided by ISP |
VC Setting | Enabled |
VPI | Provided By ISP |
VCI | Provided By ISP |
Static IP Address | Provided by ISP |
| |
Subnet Mask | Provided by ISP |
Encapsulation | Classical IP over ATM |
Bridged | Disabled |
IGMP | Disabled |
PPP Service Name | N/A |
PPP User Name | N/A |
PPP password | N/A |
DHCP Client | Disabled |
Host name | N/A |
Virtual Circuit | 0 |
LAN Configuration |
|
LAN IP | 192.168.1.254 |
LAN subnet mask | 255.255.255.0 |
DHCP server | Enabled |
DHCP address pool selection | User Defined |
User defined start address | 192.168.1.1 |
User defined end address | 192.168.1.253 |
Lease Time | 0 |
User mode | Single user |
Ethernet mode | Autosense |
NAT Configuration |
|
NAT Configuration | Dynamic NAPT |
DNS Configuration |
|
DNS proxy selection | Use auto discovered DNS servers only |
Preferred DNS Server | Provided by ISP |
Alternate DNS Server | Provided by ISP |
ADSL Configuration |
|
Trellis | Enabled |
Handshake protocol | |
Wiring Selection | Tip/Ring |
RIP Configuration |
|
RIP | Disabled |
Supplier | True |
Gateway | False |
Multicast | False |
Interval | 30 seconds |
Misc Configuration |
|
WAN side HTTP server | Disabled |
FTP server | Disabled |
43