Hardware Installation | Atlantis Land A02-RA2 ME01 manual

AtlantisLand I-Storm Lan Router ADSL

	PORT	MEANING

1	POWER (jack)	Connect the supplied power adapter to this jack

2	USB	Connect the USB cable to this port when
		Upgrading Firmware or connecting to PC

3	4 *LAN	Connect a straight or crossover Ethernet cable to
	(RJ-45)	this port when connecting to PCs or Switch in the
		network

4	LINE	Connect the supplied RJ-11 cable to this port
	(RJ-11)	when connecting to the ADSL/telephone
		network.

1.5 Hardware Installation

Power on

Connect the Adapter to power inlet and turn the power switch on, this product will enter a self-test phase. When it is in the self-test phase, the indicators READY LED will be lighted ON for about 8 seconds, and the READY LED will be flashed to indicate that the self-test phase has finished. Finally, the READY LED will be flashed to indicate that router is in normal operation.

ADSL connection

Simply plug one end of the cable into the ADSL port (RJ-11 receptacle) on the rear panel of the Router and insert the other end into splitter .

Connect Router to LAN

Prepare an Ethernet cable to connect Router to Hub or Switch of your LAN. You can connect Router to your PC directly by crossover Ethernet cable.

1.6 TCP/IP Configuration

Windows 95/98/ME

Use the following steps to configure the manager PC to be a DHCP client. These same steps must be performed for every host PC on your network if you use the DHCP function of the Router.

1.Click Start button, Settings and choose Control Panel.

2.Double click Network icon and select Configuration tab.

3.Select the TCP/IP line that has been associated to your network card in the Configuration tab and click Properties.