![](/images/new-backgrounds/1193299/19329971x1.webp)
|
|
Installation Procedures | 3 |
To connect pigtail cables to the access point, follow these steps:
1.Disable the access point radio using the web browser interface, CLI, or SNMP.
2.Remove power to the access point.
3.Remove both of the access point’s antennas by unscrewing them at their base.
Unscrew
antenna to
remove
4.For diversity antennas, connect the antenna pigtail cables to the exposed Reverse SMA connectors on both sides of the access point.
For
Screw onto access point’s
Reverse SMA connector
Antenna pigtail
cable