SMC Networks SMC2552W-G2-17 manual Multicast-data-rate, Syntax Speed speed

7 Command Line Interface

speed

This command configures the maximum data rate at which the access point transmits unicast packets.

Syntax

speed <speed>

speed - Maximum access speed allowed for wireless clients.

(Options for 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps)

Default Setting

54 Mbps

Command Mode

Interface Configuration (Wireless)

Command Usage

•The maximum transmission distance is affected by the data rate. The lower the data rate, the longer the transmission distance. Please refer to the table for maximum distances on page C-6.

Example

Enterprise AP(if-wireless g)#speed 6

Enterprise AP(if-wireless g)#

multicast-data-rate

This command configures the maximum data rate at which the access point transmits multicast and management packets (excluding beacon packets) on the wireless interface.

Syntax

multicast-data-rate <speed>

speed - Maximum transmit speed allowed for multicast data. (Options for 802.11b/g; 1, 2, 5.5, 11 Mbps)

Default Setting

1 Mbps for 802.11b/g

Command Mode

Interface Configuration (Wireless)

Example

Enterprise AP(if-wireless g)#multicast-data-rate 5.5

Enterprise AP(if-wireless g)#

7-96