SMC Networks SMC2552W-G2-17 manual Address filter entry, Address filter delete

MAC Address Authentication 7

Related Commands

address filter entry (7-72)802.1x-supplicant user (7-69)

address filter entry

This command enters a MAC address in the filter table.

Syntax

address filter entry <mac-address><allowed denied>

•mac-address- Physical address of client. (Enter six pairs of hexadecimal digits separated by hyphens; e.g., 00-90-D1-12-AB-89.)

•allowed - Entry is allowed access.

•denied - Entry is denied access.

Default

None

Command Mode

Global Configuration

Command Mode

•The access point supports up to 1024 MAC addresses.

•An entry in the address table may be allowed or denied access depending on the global setting configured for the address entry default command.

Example

Enterprise AP(config)#address filter entry 00-70-50-cc-99-1a allowed Enterprise AP(config)#

Related Commands

address filter default (7-71)802.1x-supplicant user (7-69)

address filter delete

This command deletes a MAC address from the filter table.

Syntax

address filter delete <mac-address>

mac-address- Physical address of client. (Enter six pairs of hexadecimal digits separated by hyphens.)

Default

None

7-71