SMC Networks SMC2552W-G2-17 manual System Management Commands, Show line

System Management Commands 7

show line

This command displays the console port’s configuration settings.

Command Mode

Exec

Example

The console port settings are fixed at the values shown below.

Enterprise AP#show line Console Line Information

======================================================

databits	: 8
parity	: none
speed	:	9600
stop bits	:	1

======================================================

Enterprise AP#

System Management Commands

These commands are used to configure the user name, password, system logs, browser management options, clock settings, and a variety of other system information.

Table 7-4. System Management Commands

Command	Function	Mode	Page
Country Setting
country	Sets the access point country code	Exec	7-13
Device Designation
prompt	Customizes the command line prompt	GC	7-15
system name	Specifies the host name for the access point	GC	7-15
snmp-server contact	Sets the system contact string	GC	7-42
snmp-server location	Sets the system location string	GC	7-43
Management Access
username	Configures the user name for management access	GC	7-16
password	Specifies the password for management access	GC	7-16
ip ssh-server enable	Enables the Secure Shell server	IC-E	7-17
ip ssh-server port	Sets the Secure Shell port	IC-E	7-17
ip telnet-server enable	Enables the Telnet server	IC-E	7-18
APmgmtIP	Specifies an IP address or range of addresses allowed	GC	7-22
	access to the management interface
APmgmtUI	Enables or disables SNMP, Telnet or web management	GC	7-23
	access
show APmanagement	Shows the AP management configuration	Exec	7-23

7-11