SMC Networks SMC2552W-G2-17 manual Radio Interface

6 System Configuration

Enterprise	AP(config)#snmp-server targets mytraps
192.168.1.33 chris			7-48
Enterprise	AP(config)#snmp-server filter-assignment
mytraps	trapfilter		7-50
Enterprise	AP(config)#exit
Enterprise	AP#show snmp target		7-52
Host ID	: mytraps
User	: chris
IP Address	: 192.168.1.33
UDP Port	: 162
=============================
Enterprise	AP#show snmp filter-assignments		7-53
	HostID	FilterID
	mytraps	trapfilter
Enterprise	AP#

Radio Interface

The IEEE 802.11b/g interface includes configuration options for radio signal characteristics and wireless security features.

The IEEE 802.11g standard operates within the 2.4 GHz band at up to 54 Mbps. Also note that because the IEEE 802.11g standard is an extension of the IEEE 802.11b standard, it allows clients with 802.11b wireless network cards to associate to an 802.11g access point.

The access point can operate in three modes, IEEE 802.11b only, 802.11g only, or a mixed 802.11b/g mode. Also note that 802.11g is backward compatible with 802.11b.

Each radio supports up to eight virtual access point (VAP) interfaces numbered 0 to

7.Each VAP functions as a separate access point, and can be configured with its own Service Set Identification (SSID) and security settings. However, most radio signal parameters apply to all eight VAP interfaces.

The VAPs function similar to a VLAN, with each VAP mapped to its own VLAN ID. Traffic to specific VAPs can be segregated based on user groups or application traffic. Each VAP can have up to 64 wireless clients, whereby the clients associate with these VAPs the same as they would with a physical access point.

Note: The radio channel settings for the access point are limited by local regulations, which determine the number of channels that are available. Refer to “General Specifications” on page C-1for additional information on the maximum number channels available.

Note: You must first enable VAP interface 0 before the other interfaces can be enabled.

6-48