SMC Networks SMC2552W-G2-17 manual MAC Address Authentication, Address filter default

7 Command Line Interface

MAC Address Authentication

Use these commands to define MAC authentication on the access point. For local MAC authentication, first define the default filtering policy using the address filter default command. Then enter the MAC addresses to be filtered, indicating if they are allowed or denied. For RADIUS MAC authentication, the MAC addresses and filtering policy must be configured on the RADIUS server.

Table 7-13. MAC Address Authentication

Command	Function	Mode	Page
address filter default	Sets filtering to allow or deny listed addresses	GC	7-71
address filter entry	Enters a MAC address in the filter table	GC	7-72
address filter delete	Removes a MAC address from the filter table	GC	7-72
mac- authentication server	Sets address filtering to be performed with local or	GC	7-73
	remote options
mac- authentication	Sets the interval at which associated clients will be	GC	7-73
session-timeout	re-authenticated with the RADIUS server authentication
	database
show authentication	Shows all 802.1X authentication settings, as well as the	Exec	7-69
	address filter table

address filter default

This command sets filtering to allow or deny listed MAC addresses.

Syntax

address filter default <allowed denied>

•allowed - Only MAC addresses entered as “denied” in the address filtering table are denied.

•denied - Only MAC addresses entered as “allowed” in the address filtering table are allowed.

Default

allowed

Command Mode

Global Configuration

Example

Enterprise AP(config)#address filter default denied

Enterprise AP(config)#

7-70