SMC Networks SMC2552W-G2-17 manual Configure, End, Exit

7 Command Line Interface

configure

This command activates Global Configuration mode. You must enter this mode to modify most of the settings on the access point. You must also enter Global Configuration mode prior to enabling the context modes for Interface Configuration. See “Using the Command Line Interface” on page 1.

Default Setting

None

Command Mode

Exec

Example

Enterprise AP#configure

Enterprise AP(config)#

Related Commands

end (7-9)

end

This command returns to the previous configuration mode.

Default Setting

None

Command Mode

Global Configuration, Interface Configuration

Example

This example shows how to return to the Configuration mode from the Interface Configuration mode:

Enterprise AP(if-ethernet)#end

Enterprise AP(config)#

exit

This command returns to the Exec mode or exits the configuration program.

Default Setting

None

Command Mode

Any

7-8