![](/images/new-backgrounds/1193299/193299427x1.webp)
WDS Bridge Commands 7
show filters
This command shows the filter options and protocol entries in the filter table.
Command Mode
Exec
Example
Enterprise AP#show filters
Protocol Filter Information
=========================================================
Local Bridge | :ENABLED |
AP Management | :ENABLED |
Ethernet Type Filter :ENABLED |
Enabled Protocol Filters
Protocol: ARP | ISO: 0x0806 |
=========================================================
Enterprise AP#
WDS Bridge Commands
The commands described in this section are used to set the operation mode for each access point interface and configure WIreless Distribution System (WDS) forwarding table settings.
Command | Function | Mode | Page |
bridge role | Selects the bridge operation mode for a radio interface | ||
|
|
|
|
Configures the MAC addresses of the parent bridge | |||
| node |
|
|
Configures MAC addresses of connected child bridge | |||
| nodes |
|
|
bridge | Sets the aging time for dynamic entries in the WDS | GC | |
forwarding table |
|
| |
show bridge | Displays the current WDS forwarding table aging time | Exec | |
|
|
|
|
show bridge | Displays current entries in the bridge MAC address | Exec | |
| table |
|
|
show bridge link | Displays current bridge settings for specified interfaces | Exec | |
|
|
|
|