SMC Networks SMC2552W-G2-17 manual Ip ssh-server enable, Ip ssh-server port

7 Command Line Interface

ip ssh-server enable

This command enables the Secure Shell server. Use the no form to disable the server.

Syntax

ip ssh-server enable no ip ssh-server

Default Setting

Interface enabled

Command Mode

Interface Configuration (Ethernet)

Command Usage

•The access point supports Secure Shell version 2.0 only.

•After boot up, the SSH server needs about two minutes to generate host encryption keys. The SSH server is disabled while the keys are being generated. The show system command displays the status of the SSH server.

Example

Enterprise AP(if-ethernet)#ip ssh-server enable

Enterprise AP(if-ethernet)#

ip ssh-server port

This command sets the Secure Shell server port. Use the no form to disable the server.

Syntax

ip ssh-server port <port-number>

• port-number- The UDP port used by the SSH server. (Range: 1-65535)

Default Setting

22

Command Mode

Interface Configuration (Ethernet)

Example

Enterprise AP(if-ethernet)#ip ssh-server port 1124

Enterprise AP(if-ethernet)#

7-16