Motorola SBG6580 manual Create a Wi-Fi Network Using the WPS Feature, Click Wireless

Page 24

B

Create a Wi-Fi Network Using the WPS Feature

You can use one of three options to add WPS-enabled devices to your Wi-Fi Network. After logging in to the modem interface, use one of the following options to add advices.

Option 1 - PIN

1.Click Wireless.

2.Click Basic.

3.Select Restore Wireless Defaults and click Apply.

4.Click Primary Network.

5.Select WPS from Automatic Security Configuration pull-down menu.

6.Enter the Device Name.

7.Enter the PIN of the device you are adding to the WPS Setup AP field.

8.Wait for the web page to display “Your AP is now waiting for the STA to connect.

9.Select your wireless network on the Client GUI (device), and then connect using the PIN. The system reports when you have successfully connected.

Option 2 - WPS Pairing Button

1.Click Wireless.

2.Click Basic.

3.Select Restore Wireless Defaults and Apply.

4.Click Primary Network.

5.Select WPS from the Automatic Security Configuration pull-down.

6.Press and hold the WPS pairing button (approximately 7 seconds). The Wireless LED starts blinking.

7.Select the correct SSID on the device you are pairing, and then connect by pushing the device’s WPS button. The system reports when you have successfully connected.

Option 3 - Push-Button method from the SBG6580 GUI

1.Click Wireless.

2.Click Basic.

3.Select Restore Wireless Defaults and Apply.

4.Select Push-Buttonfrom the WPS Add Client options and then press the Add button. A

page displays “Your AP is now waiting for the STA to connect.

5.Select your network name on the device being added to your network.

6.Push the WPS button on the device to connect. The system reports when you have successfully connected.

Note: The method of configuring the device for WPS varies depending on the wireless adapter and the operating system (Windows XP, Mac, etc.,) being used. Some adapters have a physical button, and others provide a Client GUI that allow the user to select either PIN or Push Button method.

Creating Wi-Fi Networks •

Motorola SURFboard • User Guide

16

Image 24
Contents Motorola SURFboard Safety and Regulatory Information Table of Contents Software License Warranty Information Safety and Regulatory Information Read This Before You BeginFCC Statements Industry Canada IC Statement Restrictions on the Use of Wireless Devices Box Contact InformationSystem Requirements Product Overview Front PanelAbout Wi-Fi Protected Security Feature WPS Rear PanelInstalling the Modem Connecting the SBG6580Wall Mounting the Modem Installing the Modem Wall Mounting Template Connecting to the Internet Restoring the Default Username and PasswordTesting Your Internet Connection Configuring TCP/IP for Windows XPConfiguring TCP/IP for Windows Vista Click Start, Settings, and Control PanelConfiguring TCP/IP for Windows Renewing the IP Address in Windows XP, Vista, orCreating a Backup Copy of Your Modem Settings Restoring Your Modem Configuration Using a Backup CopyPerforming a System Status Check Using the Dhcp Server Feature Activate the Dhcp ServerCreate a Primary Wireless Network Click Wireless Click Primary NetworkSelect an Automatic Security Configuration option Select the WPA/WPA2 Encryption typeCreate a Guest Wireless Network Click Wireless Click Guest Network Enable the Guest NetworkCreate a Wi-Fi Network Using the WPS Feature Click WirelessSelect Restore Wireless Defaults and Apply Enable Parental Controls Create Policies to Block or Allow ContentCheck the Enable Parental Control box Click Parental ControlCreate an Override Password Click User SetupAdd Users to the Parental Controls Create a Time of Day Policy ToD FilterTroubleshooting Front Panel Icons and Error Conditions Icon Status IF, During Startup IF, During Normal OperationProduct Specifications Product Specifications Network Software License You mayYou may not Government Restricted Rights Warranty Information Software License & Warranty Motorola, Inc Tournament Drive Horsham, PA 19044 U.S.A
Related manuals
Manual 36 pages 46.66 Kb