Chapter 1 Cisco AS5850 Product Overview
In systems with two RSCs, the way the RSC uses the backplane buses will depend on the mode the system is operating in. Sometimes one RSC will control all the backplane DS0s and sometimes their use will be divided between the RSCs.
Environmental Monitoring
Environmental monitoring for the full chassis is carried out by both RSCs. This means that warnings about overheating cards go to both RSCs, regardless of which one owns the slot. Sending the warnings to both RSCs reduces the chance of an environmental problem going unreported.
For detailed chassis specification tables, refer to Appendix A, “Cisco AS5850 Specifications.”
Field-Replaceable Units
The Cisco AS5850 is designed to make component removal and replacement easy. This section describes the Cisco AS5850
Table
Table
| Product Number |
|
|
24E1 trunk card | |
|
|
24T1 trunk card | |
|
|
CT3/216 universal port card | |
|
|
|
|
324 universal port card | |
|
|
Route switch controller card (RSC) | |
|
|
Enhanced route switch controller card (ERSC) | |
|
|
Blank filler cards |
|
|
|
Cooling module | |
|
|
Power entry module | |
|
|
|
|
Singlemode gigabit Ethernet module | |
|
|
Multimode gigabit Ethernet module | |
|
|
2400 W 120V | |
|
|
| |
|
|
For information about the feature cards used in the Cisco AS5850, refer to the Cisco AS5850 Universal Gateway Card Guide that shipped with your system. For information about other FRUs, review the rest of this chapter, or for detailed specification tables, refer to Appendix A, “Cisco AS5850 Specifications.”
|
| Cisco AS5850 Universal Gateway Hardware Installation Guide |
|
| |
|
|
| |||
|
|
|
| ||
|
|
|
| ||