User Guide | WireSpeed Dual Connect Modem |
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local Telecommunication Company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative, and designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions may give the telecommunications company cause to request the user to disconnect the equipment.
Users should ensure, for their own protection, that the electrical ground connections of the power utility, telephone lines, and internal, metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.
CAUTION 
Users should not attempt to make such connections themselves, but should contact the appropriate electrical inspection authority, or electrician, as appropriate.
4.SYSTEM REQUIREMENTS
4.1Minimum System Requirements for USB Installation
The following system specifications are required for optimum performance of the WireSpeed Dual Connect modem via USB installation:
•Pentium or equivalent and above class machines
•Microsoft Windows 98SE, ME, 98FE, 2000, or XP installed
•Computer Operating System
•Internet Explorer 4.x or Netscape Navigator 4.x or higher
•32 MB RAM
•10 MB of free hard drive space
•USB Version 1.0 or 1.1 compliant bus
4.2Minimum System Requirements for 10/100
The following system specifications are required for optimum performance of the WireSpeed Dual Connect modem via 10/100
•Pentium or equivalent and above class machines
•Microsoft Windows 95, 98, NT 4.0, 2000, or XP installed
•Computer Operating System
•32 MB RAM
•Ethernet 10/100
•10 MB of free hard drive space
•TCP/IP Protocol stack installed
3 |