Multitech MT5634ZBA-V-V92, MT5634ZBA-GLOBAL manual Using the Global Wizard to Configure Your Modem

Page 12

Chapter 2 – Installation

Step 4: Configure the Modem for Your Country or Region – Global Product Only

Different countries have different requirements for how modems must function. Therefore, before you use your modem, you must configure it to match the defaults of the country/region in which you are using it. You must also do this if you move the modem to another country/region after it has been configured for the first country/region. You can use one of two configuration methods:

1.Use the Global Wizard to Configure Your Modem

2.Use AT Commands to Configure Your Modem

Using the Global Wizard to Configure Your Modem

The Global Wizard configuration utility is recommended for computers running Windows 95 or newer.

1.Insert the MultiModem Product CD into the CD-ROM drive. The Autorun menu should appear.

2.Click Initial Setup and Country/Region Selection.

3.Choose either:

Run Global Wizard from CD. This will not load the wizard onto your hard drive, or

Install Global Wizard on the HD. This will install the wizard onto your hard drive for future use.

4.The Global Wizard dialog box appeared. Click Next.

5.The Global Wizard searches for your modem and identifies it. Click Next.

6.Select the country/region in which the modem will be used. Click Next.

7.Review your country/region choice. If it is correct, click Next to configure the modem.

8.When Global Wizard announces that the parameters have been set, click Finish to exit.

Using AT Commands to Configure Your Modem

Non-Windows users can configure the modem using AT commands. You must enter these commands in your communication program’s terminal window.

1.Run a terminal emulation software.

2.To configure the modem for a specific country/region:

Type AT%T19,0,nn, where nn is the country/region code in hexadecimal notation. Click ENTER. The message OK displays.

3.To verify that the correct country/region has been configured, type:

ATI9 and click ENTER.

The country/region code displays:

 

 

Example:

Country/Region

AT Command (hexadecimal)

Country code (decimal)

 

Euro/NAM

AT%T19,0,34 (default)

52

A list of country/region codes can be found on the Multi-Tech Web site at:

http://www.multitech.com/PRODUCTS/Categories/Modems/global/configurationh.asp#chart

Then click on MultiModemZBA. The Global Modem Country Approvals page displays. On this page you can view approvals, configuration strings and responses by country and products.

Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G)

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents MultiModem ZBA MultiModem ZBA MT5634ZBA-Series User Guide Table of Contents Table of Contents Features Table IntroductionFeatures Specific to Installation Safety WarningsChange the Internal Jumpers Opening the ModemChanging the Voice Jumper Connect the Modem to Your PC Global ConnectionsNon-Global Connection Connect the Two-Wire Leased Line Leased Line Only Connect the Modem to the AC Power OutletPower-On Test Connect the Modem to Your PCInstall the Modem Driver Installing the Modem DriverUsing the Global Wizard to Configure Your Modem Using AT Commands to Configure Your ModemConfigure the modem for best performance Modem Serial Speed GuidelinesOperation About the Front PanelSetup Leased-Line OperationOperation Connecting to the Internet AT Commands, S- Registers, and Result Codes Remote Configuration Basic ProcedureSetup Changing the Setup PasswordChanging the Setup Password Callback SecurityTurning Callback Security On and Off Setting Callback Security Message Parity Assigning Callback Passwords and Phone NumbersCalling Procedures Password-Only CallbackNumber-Entry Callback Extension-Entry CallbackCallback Security Commands Direct ConnectionCallback Assignments Form Troubleshooting None of the Indicators LightModem Does Not Respond to Commands Page Page Data Is Being Lost There Are Garbage Characters on the MonitorModem Doesn’t Work with Caller ID Fax and Data Software Can’t Run at the Same TimeAppendix a Technical Specifications Fax Data RatesReceiver Sensitivity Upgrade Overview Appendix B Upgrading the Modem’s FirmwareIdentify the Modem Firmware Identify the Current Firmware VersionDownload the Upgrade File Extract the Upgrade FilesUpgrade the Modem’s Firmware Restore Your ParametersAppendix C Regulatory Compliance FCC Part 15 RegulationFCC Part 68 Telecom EMC, Safety and R&TTE Directive Compliance Canadian Limitations NoticeIndustry Canada International Modem RestrictionsNew Zealand Telecom Warning Notice South African StatementAppendix D Waste Electrical and Electronic Equipment Weee Waste Electrical and Electronic Equipment StatementAppendix E Installing a Modem under Linux SetupAppendix F Connecting to a Cisco Router Connecting to a Cisco Router Console PortRemote Configuration Console Port ConnectionsAppendix G Rohs HT/TS Substance Concentration Index Caller IDIndex

MT5634ZBA-GLOBAL, MT5634ZBA-V-V92, MT5634ZBA-SERIES, MT5634ZBA specifications

The Multitech MT5634ZBA series is a line of high-performance 56K modems that have been engineered for reliable data transmission over telephone lines. This series includes models such as the MT5634ZBA, MT5634ZBA-SERIES, MT5634ZBA-V-V92, and MT5634ZBA-GLOBAL, each catering to different communication needs while maintaining a commitment to quality and efficiency.

One of the standout features of the MT5634ZBA series is its support for the V.92 protocol. This technology significantly enhances the modem's performance by allowing faster upload speeds compared to its predecessors. With V.92, users can enjoy uploads at speeds up to 48Kbps, which is particularly beneficial for those who frequently send large files or engage in video conferencing. Furthermore, the V.92 protocol supports features like modem-on-hold, enabling users to receive incoming calls without disconnecting their internet session.

Another notable characteristic of the MT5634ZBA series is its globally compatible design. The MT5634ZBA-GLOBAL version has been adapted to work with various international telecommunications standards, making it an excellent choice for businesses and individuals who require a reliable connection across different countries. This international usability ensures that users can connect seamlessly, regardless of location.

The MT5634ZBA modems also feature advanced error correction and data compression technologies, such as MNP2-4 error control, and V.42 bis compression. These technologies work together to improve data integrity and enhance the overall throughput of the modem, resulting in a more efficient and reliable connection.

In terms of hardware, the MT5634ZBA series modems are built with robust components that ensure longevity and consistent performance. They are equipped with standard serial interface ports that allow easy integration with various devices, such as computers, point-of-sale systems, and other communication equipment.

In summary, the Multitech MT5634ZBA series represents a significant advancement in modem technology, combining speed, reliability, and global adaptability. With its support for V.92, comprehensive error correction, and high-level data handling capabilities, the MT5634ZBA series is an ideal choice for users seeking efficient and effective communication solutions, whether at home or in business environments.
Top Page Image Contents