Maxon Telecom MM-6864, MM-6854 manual Debugging & Indicator Lights

MM6854/64 Dual Band GSM Data Modem

	5.1.31		AT+CEER – Displays why last call was disconnected	20
	5.1.32		AT+CMGD – Delete messages	20
	5.1.33		AT+CMGF – Message format	21
	5.1.34		AT+CMGL – List messages	21
	5.1.35		AT+CMGR – Read messages	22
	5.1.36		AT+CMGS – Send messages	22
	5.1.37		AT+CMGW – Write messages to memory	23
	5.1.38		AT+CMSS – Send messages from storage	23
	5.1.39		AT+CNMI – New Message	24
	5.1.40		AT+CPIN – Enter PIN and query blocks	25
	5.1.41		AT+CR – Cellar result code for outgoing calls	25
	5.1.42		AT+CRC – Cellar result code	25
	5.1.43		AT+CRLP – Radio Link Protocol parameters	26
	5.1.44		AT+CSCA – Service centre address	26
	5.1.45		AT+CSDH – Show test mode parameters	26
	5.1.46		AT+CSMP – Set text mode parameters	27
	5.1.47		AT+DR – Data compression report	27
	5.1.48		AT+DS – Data compression mode	28
	5.1.49		AT+FCLASS – Select, read or test service class	28
	5.1.50		AT+FMI – Report manufacturer ID	28
	5.1.51		AT+FMM – Report module ID	29
	5.1.52		AT+FMR – Report revision	29
	5.1.53		AT+FRH – Receive HDLC data with carrier	29
	5.1.54		AT + FRM – Receive data with carrier	29
	5.1.55		AT+FTH – Transmit HDLC data with carrier	30
	5.1.56		AT+FTM – Transmit data with carrier	30
	5.1.57		AT+GMI – Request manufacturer ID	30
	5.1.58		AT+GMM – Request model ID	30
	5.1.59		AT+GMR – Request revision ID	31
	5.1.60		AT+ICF – Character framing	31
	5.1.61		AT+IFC – Local flow control	32
	5.1.62		AT+ILRR – Display local report rate	32
	5.1.63		AT+IPR – Set terminal equipment data rate	32
	5.1.64		CME ERROR<n>	33
	5.1.65		CMS ERROR<n>	33
	5.1.66		S Register Summary	34
	5.2	Summary		35
6 DEBUGGING & INDICATOR LIGHTS				37
	6.1	Summary		37
7	INSTALLATION			39
	7.1	Introduction		39
	7.2	Antennas		39
	7.3	Power Sources		39
	7.4	Fusing		39
	7.5	Cabling		40
	7.6	Fixing		40
	7.7	Connections		41
	7.7.1		9 pin D-type(RS-232 Interface)	41
	7.7.2		25 pin D-type	41
	7.8	Summary		41
8	APPENDICES			43
	8.1 Setting up Windows Modem interface			43
	8.1.1		Open up the Control Panel	43
	8.1.2		Double click on the modem icon	43
	8.1.3		Highlight the don’t detect my modem box	44
	8.1.4		Select the standard 19200 modem	44
	8.1.5		Select the appropriate COM port	45
ME 820047				Issue 1.0
Page iv				03/00