Maxon Telecom MM-6854, MM-6864 manual ATQ Result code suppression, 11 ATS0=n Auto-answer mode

Page 23

MM6854/64 Dual Band GSM Data Modem

5.1.9ATO0 – Return to transparent mode (switch from command mode to data mode).

If you wish to interrupt the data flow only briefly, you can use the ATO0 command to return your modem to the transparent mode, i.e. the data flows once again.

Enter

ATO0

Response

Notes: None

Result codes:

OK

ERROR

5.1.10 ATQ - Result code suppression

This command is used to enable and disable the result code.

Enter

ATQ0

ATQ1

Response

Enable result code Disable result code

Notes: None

Result codes:

OK

ERROR

5.1.11 ATS0=n – Auto-answer mode

Enter

Response

ATS0=0

No auto-answer, incoming calls are ignored (Default value).

ATS0=1

The modem will answer incoming calls after the first ring.

….etc.

 

ATS0=5

The modem will answer incoming calls after the fifth ring.

ATA

The modem will answer the incoming call.

 

Notes: The ATA command can still be used regardless of the

 

value of the ATS0=n string.

 

The S0 register can be read out by the ATS0? command, the

 

modem will then display the current value.

 

Result codes:

 

OK

 

ERROR

5.1.12 ATS1? – Number of rings

Displays the number of rings, which the modem has detected. This register is cleared when no rings occur for 8 seconds, or when the value becomes equal to S0.

Issue 1.0

ME 820047

03/00

Page 15

Page 22 Page 24
Image 23
Page 22 Page 24
Contents MM-6854 / MM-6864 GSM Dual-Band Data Modem Page MM6854/64 Dual Band GSM Data Modem MM6854/64 Dual Band GSM Data Modem Table of Contents Debugging & Indicator Lights List of Figures MM6854/64 Dual Band GSM Data Modem Introduction Summary Basic Specifications SpecificationsMM6854/64 Dual Band GSM Data Modem Applications System ApplicationsGSM / GPS Application GSM / GPS ApplicationInserting the SIM card OperationIntroduction Network ConnectionV.24 Interface Set up the appropriate softwareTurning on the modem Confirming Operation MM6854/64 Dual Band GSM Data Modem AT Commands Re-execute last command 1 +++CR Escape commandAtdl ATA Manually answer an incoming callATD Dial a telephone number ATIn Identification ATE Command EchoATH Hang up 12 ATS1? Number of rings 11 ATS0=n Auto-answer modeATQ Result code suppression 16 ATS5 Backspace character 14 ATS3 Command line termination character13 ATS2- Escape character 15 ATS4 Line Feed character21 ATS12 Escape code guard time 18 ATS7 Wait time for carrier19 ATS8 Wait time before dialling 20 ATS10 Wait time before disconnection26 AT&D Data Terminal Ready options ATX Defines Connect results code formatATZ Load user profile 25 AT&C Data carrier detect options29 AT&W Save current configuration 27 AT&F Restore default configuration28 AT&V Display current configuration 32 AT+CMGD Delete messages 30 AT+CBSTs,m,p Select bearer service type31 AT+CEER Displays why last call was disconnected 34 AT+CMGL List messages 33 AT+CMGF Message format36 AT+CMGS Send messages 35 AT+CMGR Read messages38 AT+CMSS Send messages from storage 37 AT+CMGW Write messages to memoryAT+CNMI=? 39 AT+CNMI New Message42 AT+CRC Cellar result code 40 AT+CPIN Enter PIN and query blocks41 AT+CR Cellar result code for outgoing calls 43 AT+CRLP Radio Link Protocol parameters 44 AT+CSCA Service centre address45 AT+CSDH Show test mode parameters 47 AT+DR Data compression report 46 AT+CSMP Set text mode parameters50 AT+FMI Report manufacturer ID 48 AT+DS Data compression mode49 AT+FCLASS Select, read or test service class 54 AT + FRM Receive data with carrier 51 AT+FMM Report module ID52 AT+FMR Report revision 53 AT+FRH Receive Hdlc data with carrier58 AT+GMM Request model ID 55 AT+FTH Transmit Hdlc data with carrier56 AT+FTM Transmit data with carrier 57 AT+GMI Request manufacturer ID60 AT+ICF Character framing 59 AT+GMR Request revision ID63 AT+IPR Set terminal equipment data rate 61 AT+IFC Local flow control62 AT+ILRR Display local report rate CMS ERRORn CME ERRORnS0 Rings to auto-answer Register SummarySummary MM6854/64 Dual Band GSM Data Modem Debugging & Indicator Lights MM6854/64 Dual Band GSM Data Modem Antennas InstallationPower Sources FusingFixing Cabling2 25 pin D-type Connections1 9 pin D-type RS-232 Interface MM6854/64 Dual Band GSM Data Modem Open up the Control Panel Double click on the modem icon Setting up Windows Modem interfaceAppendices MM6854/64 Dual Band GSM Data Modem Select the appropriate COM port Set the location information Finish Installation Select Properties Select Connection Set Data Bits, Parity and Stop bits Select Flow Control and Software XON/XOFF 12 RS-232 Select Hyper Terminal from Programs Menu Setting up Hyper TerminalSelect Hyper Terminal Set Port Port Settings Properties Ascii settingsWin Fax Pro Setup Setting up Win Fax ProCommunication Setup MM6854/64 Dual Band GSM Data Modem Description of Accessory Maxon Part Number AccessoriesMM6854/64 Dual Band GSM Data Modem Abbreviation Meaning Glossary

MM-6854, MM-6864 specifications

Maxon Telecom is renowned for its innovative communication solutions, and two of its standout products are the MM-6864 and MM-6854 models. Both devices are designed to cater to the needs of modern enterprises, offering robust features and cutting-edge technology to enhance communication effectiveness.

The Maxon Telecom MM-6864 is a feature-rich communication device that emphasizes versatility and connectivity. One of its main features is its ability to support multiple communication protocols, making it compatible with a wide range of network systems. This flexibility is essential for businesses that require seamless integration with existing infrastructures. The MM-6864 also boasts advanced encryption technology, ensuring secure communications to protect sensitive information.

Another characteristic that sets the MM-6864 apart is its expansive coverage capabilities. The device utilizes the latest in antenna technology, which not only extends its range but also improves signal strength in challenging environments. This makes it an ideal choice for enterprises operating in remote locations or large facilities where maintaining a reliable connection is paramount.

On the other hand, the Maxon Telecom MM-6854 is tailored more towards compactness and user-friendliness without compromising on features. One of its significant characteristics is its lightweight design, making it easy to carry and suitable for on-the-go professionals. The MM-6854 also offers impressive battery life, allowing users to stay connected throughout their busy day without the constant need for recharging.

Both devices incorporate advanced digital signal processing (DSP) technology, ensuring clear audio quality during communications. This is crucial in fast-paced business environments where understanding every detail is vital. Additionally, they come equipped with customizable user interfaces, enabling users to tailor settings according to their specific needs, whether they are on a conference call or conducting day-to-day operations.

In conclusion, the Maxon Telecom MM-6864 and MM-6854 models stand out in the telecommunications landscape due to their combination of advanced features, reliable connectivity, and user-centric designs. Whether a business requires the extensive capabilities of the MM-6864 or the portability of the MM-6854, Maxon Telecom delivers devices that meet diverse communication needs while ensuring security and efficiency.
Top Page Image Contents