Navini Networks, Inc. | Ripwave Modem User Guide |
Installing an Ethernet Modem, continued
Step | Action | Illustration |
4.Rotate the antenna on the Ripwave Modem clockwise 180 degrees
| to the UP position. This | Antenna |
|
| reveals the Ripwave |
|
|
| Modem indicator lights. |
|
|
| CAUTION! Rotation or |
|
|
| movement of the |
| Signal Strength |
| antenna in any other |
| Indicator (SSI) |
| direction may cause |
|
|
| damage to the Ripwave |
| Battery |
| Modem. |
| |
|
|
| Indicator |
|
|
| Power |
|
|
| Indicator |
5. | Push the On/Off button | 2.4 GHz | 2.3, 2.5 & |
| on the Modem to ON. |
| 2.6 GHz |
On/Off
Switch
6. | If the Green Power |
|
|
| indicator light comes on, |
|
|
| proceed to Step 7. If not, |
|
|
| there is a problem with |
|
|
| the Modem or the AC |
|
|
| power adapter. Check all |
|
|
| cables for proper |
|
|
| connection. Otherwise, | Power |
|
| contact the supplier | Indicator | |
| from whom you |
|
|
| obtained the package. |
|
|
Part | Copyright © 2003 Navini Networks, Inc. All rights reserved. | 13 |
July 30, 2003 |
|
|