Navini Networks, Inc. | Ripwave Modem User Guide |
Indicator Lights, Continued
Signal Strength Indicator (SSI)
Constant Green : |
| Strong signal |
|
|
|
Constant Yellow : |
| Medium signal |
|
|
|
Constant Red : |
| Weak signal |
|
|
|
Flashing Red : |
| No signal |
|
|
|
Battery Indicator |
| |
Constant Yellow : |
| Battery is charging |
|
|
|
Constant Red : |
| Battery is less than 20% charged |
|
|
|
Flashing Red : |
| Battery is less than 10% charged |
|
|
|
Off : |
| Battery is fully charged or not installed |
|
|
|
Power Indicator |
| |
Constant Green : |
| The Modem is ON (AC or DC power) |
|
|
|
Installing Navini Monitor
The Navini Monitor software provides two types of information: signal strength and quality of the incoming signal, and battery strength (batteries are optional). It can also provide information about the connectivity to the Service Provider’s network. These displays may be required when troubleshooting Modem problems.
Before you install, please note:
•For Windows NT and Windows 2000 you must be logged into an account having Administrative privileges in order to install the Navini Monitor software.
•For Windows 95, Windows 98, and Windows 98SE Operating Systems (OS), the OS CD may be required to complete this installation. If prompted, insert the OS CD into the
•If you are going to upgrade your PC Operating System after loading the Navini Monitor software, you must first uninstall Navini Monitor prior to upgrading the OS. Otherwise, Navini Monitor will not work. See Uninstall instructions in this Guide.
Part | Copyright © 2003 Navini Networks, Inc. All rights reserved. | 21 |
July 30, 2003 |
|
|