Navini Networks, Inc. | Ripwave Modem User Guide |
Minimum
Computing
Requirements
(See, also, Addendum 1)
Operating | Ethernet Modems: Any Win32® Operating System |
System1: | (OS) - Windows® 95, Windows 982, Windows |
| 98SE2, Windows 2000, Windows ME2, Windows |
| XP, or later version. Windows XP must be Service |
| Pack Level 1 or higher. Internet Explorer 3.0 or |
| higher is required for installation on Windows 95 |
| Operating Systems. |
| USB Modems: Windows® 982, Windows 98SE2, |
| Windows 2000, Windows ME2, Windows XP, |
| or later version. USB will not work with Windows |
| 95 or Windows NT. Windows XP must be Service |
| Pack Level 1 or higher. |
| General Information: |
| Ensure that the pc network port is enabled. |
| MacIntosh systems and Lynx/Unix systems are |
| not supported. |
CPU: | Pentium level or higher |
RAM: | 32 MB or the Operating System minimum, |
| whichever is greater |
Hard Drive: | 10 MB free disk space for Navini Monitor software |
Monitor: | 256 colors, 800 x 600 resolution |
1NOTE: If you are going to upgrade your Operating System after loading the Navini Monitor software, you must first uninstall Navini Monitor prior to upgrading the OS. Otherwise, Navini Monitor will not work. See Uninstall instructions in this Guide.
2NOTE: The Ripwave Modem must be left powered ON whenever you shut down or restart any Windows 98 or ME platforms. If the Modem is off, a blue screen appears on the monitor. In the event that happens you will most likely have to power cycle the PC.
The Ripwave Modem installation sections include instructions for both Ethernet and USB connections. Be sure to use the instructions that apply to your Ripwave model. The Navini Monitor software installation procedure is the same for any of the Ripwave models.
This manual will guide you through the simple process of installing the Ripwave Modem and software, which has been developed to optimize the ease and convenience for you, our valued customer. The 2.6 GHz model is used in most of the illustrations in this manual where there are no differences in the 2.3, 2.4, 2.5, and 2.6 GHz models.
If you experience any difficulties with your unit, please contact your Service Provider or the vendor from whom you obtained your Ripwave Modem.
Part | Copyright © 2003 Navini Networks, Inc. All rights reserved. | 9 |
July 30, 2003 |
|
|