Iomega G3 manual Unpack the Buz card

4. Unpack the Buz card.

CAUTION Touch a grounded metal object to discharge any build-up of static electricity before handling the Buz card. M

Handle the card by its edges. If you lay it down, place it on the static-proof bag it is shipped in.

5.Push the Buz card FIRMLY into the PCI slot, then replace the PCI slot cover screw.

Bracket

flush to chassis

Connector fits evenly

Optional: Connect internal SCSI device Data cable here

Pin 1

PCI slot

Ensure the bracket fits flush against the chassis. The connector should fit evenly on both ends of the PCI slot to ensure a good connection.

MOptional internal drive installation: If you are connecting an internal SCSI

drive to the SCSI connector on your Buz card, you may want to install or connect it at this time.M

6