Iomega G3 manual Buz Box Connections, Buz Card Connectors

Buz Box Connections

1.Connect the Buz box cable to the Buz card on the back of your computer.

The longer connector on the back of the Buz card is the connector for external SCSI devices (such as Jaz drives). A variety of SCSI devices can connect to the Buz card. See your SCSI device documentation for proper connection. Also see the SCSI Guidelines section in this booklet.

Buz Card Connectors

SCSI Connector Fifteen-Pin Connector

MOptional: If you are connecting an external SCSI device to the Buz card, it will be easier to connect it before connecting the Buz box fifteen-pin connector. M

MNOTE: If your external SCSI device does not match the connector on the back

of the Buz card, purchase a quality cable converter from your dealer or call 1-800

MYSTUFF. M

8