Multitech RF820-AP, RF830-AP manual Add an IKE Connection, Add IKE Connection

Page 61

Chapter 5 – Configuration Using Web Management Software

VPN > IPSec > Add IKE Connection

Add an IKE Connection

This section enables setting IPSec tunnels through an IKE connection.

Screen Note: Failover is available on the RF830/RF830-AP only.

Add IKE Connection

Connection Name

Enter a text name that will identify the connection for you.

Compression

Check the compression checkbox to enable IPCOMP, the compression algorithm.

Perfect Forward Secrecy (PFS)

Check the PFS checkbox to enable PFS, a concept in which the newly generated keys are unrelated to the older keys). This is enabled by default.

Authentication Method

Authentication can be done using Pre-Shared Secrets.

Secret

The Pre-Shared Secret must be agreed upon and shared by the VPN endpoints; it must be configured at both endpoints of the tunnel.

Select Encryption

Select the encryption method. 3DES is recommended. Options include: 3DES, DES, AES-128, AES- 192, AES-256

IKE Life Time

The duration for which the ISAKMP SA should last is from successful negotiation to expiration. The default value is 3600 seconds and the maximum is 28800 seconds.

Multi-Tech Systems, Inc. RouteFinder SOHO RF820/RF820-AP & RF830/RF830-AP User Guide (S000399E)

61

Image 61

Contents RouteFinder→ Soho Revision Date Description Warranty TrademarksPatents World HeadquartersContents Introduction Description Key FeaturesFeature Details RouteFinder Documentation RouteFinder Ship Kit ContentsRF820/RF820-AP Front Panel RF830/RF830-AP Front Panel Telecom Warnings for the ModemLEDs DescriptionBack Panels ConnectorRF820 RF820-AP RF830 RF830-AP Typical Applications Specifications RF820 and RF820-AP RF830 and RF830-AP SpecificationsVPN Specifications Specifications for 802.11b/g InterfaceRF8230AP and RF830AP Cabling Your RouteFinder InstallationRF820 RF820-APRF830-AP RF830Establish TCP/IP Communication Setting up a Workstation and Starting RouteFinderClick the Properties button To Set a Fixed IP AddressOpen a Web Browser Menu Bar Sub Other Options Screen Name Input Area Navigating the ScreensMenu Bar Network Setup WirelessSub-Menus Table of Menus and Sub-MenusStart the RouteFinder Configuration Configuring RouteFinderAbout IPSec RouteFinder Initial Configuration Using the Wizard Setup Screen to Configure Your RouteFinderScreen Notes Wizard SetupWAN 1 Dhcp Client Choice ISP SettingsWAN 1 Static IP Choice WAN 1 PPPoE Choice MTU Save to Flash Memory Important Note About Save and RestartRestart Administration Configuration Using Web Management SoftwareAdministration System Setup Administration System SetupConfigure Email Notification Auto Reboot TimerEmail Address Administrative Access Administration Administrative AccessAdministration Administrative Access Screen NoteAdministrative Access Http Port Change PasswordOld Password, New Password, Confirmation Web Interface Inactivity Time OutAdministration Remote Syslog Administration System LogsAdministration System Logs Administration Remote Syslog Remote SyslogSntp Configuration Administration Sntp ClientAdministration Sntp Client General ConfigurationDaylight Configuration Administration Sntp Client Time Zone ConfigurationDaylight Saving Start Time Daylight Saving End TimeAdministration Tools Administration ToolsReset Modem Administration Factory DefaultsReset to Factory Defaults Administration Tools Administration Factory DefaultsNetworks & Services Network Configuration Networks & ServicesNetworks & Services Network Configuration Network Configuration Fields RF830/RF830-AP Network Configuration ScreenHow to Confirm Your Entries Important Network NotesNetworks & Services Service Configuration Networks & Services ServicesThis is an example of screen with the TCP protocol selected Editing and Deleting User-Added Services Service ConfigurationTCP, UDP, and TCP& UDP AH and ESPNetwork Setup IP Settings Network SetupNetwork Setup IP Settings Default Gateway WAN Choice Dhcp Client DefaultWAN Choice Static IP WAN 1 & WAN 2 WAN 2 is for the RF830/RF830-AP onlyWAN Choice PPPoE Wlan Settings Network Setup Wireless LANSecurity Selection Disable Network Setup Wireless LAN Wlan SecurityWlan Security Select SecurityWEP Key to Index Network Setup Wireless LAN Wlan Security WEP KeyWPA-PSK/WPA2-PSK Key Group Key Rekeying Access Control List Network Setup Wireless LAN Wlan Client FilterNetwork Setup Advanced IP Settings PPP Client for Cellular/Analog Modem Backup Network Setup PPP Cellular/Analog BackupNetwork Setup PPP Cellular/Analog Backup Screen Note This screen applies to the RF820/RF820-AP onlyModem Initialization Strings Signal Strength only for Cellular ModemsSIM Initialization String only for Cellular Modems PPP Keep-Alive ParametersLoad Balancing Weight Configuration Network Setup Load BalancingLoad Balancing Keep Alive URL Configuration Network Setup Load BalancingNetwork Setup Dynamic DNS Network Setup Dynamic DNSDdns Failover for the RF830/RF830-AP only Custom DNS Use WildcardCheck IP Check IP ServerNetwork Setup IP Masquerading Network Setup Static RoutesNetwork Setup Snat Network Setup SnatService Network Setup Dnat Network Setup DnatAdd Dnat Definition WAN IPPacket Filter Packet Filter Rules Packet FiltersFrom Host/Networks ServicesTo Host/Networks Action Packet Filters Advanced Filters Packet Filters Advanced FiltersPacket Filter Packet Filter Log Packet Filter IcmpIcmp Forwarding Icmp on FirewallVPN IPSec VPN Virtual Private NetworkVPN IPSec Add a New ConnectionAdd IKE Connection Add an IKE ConnectionVPN IPSec Add IKE Connection Key Life NetBIOS BroadcastNumber of Retries Left Next HopAdd Manual Connection Add a Manual ConnectionVPN IPSec Add Manual Connection Fqdn Pptp Status Pptp SettingsEncryption Strength Select Remote AddressAuthentication Type User AuthenticationAuthentication Type Select Radius Proxy Http Proxy ProxyHttp Status Http Allowed NetworksProxy Custom Filters DNS Proxy Proxy DNS ProxyProxy DNS Proxy LAN StatusDhcp Server LAN Subnet Settings Dhcp Server LAN Subnet SettingsDhcp Server Dhcp Server on LANAdd Fixed Address Dhcp Server Wlan Subnet Settings and Wlan Fixed AddressesAdd Fixed Address Utilities Firmware Upgrade Utilities BackupUtilities Backup Utilities Firmware Upgrade BackupStatistics & Logs System Information Statistics & LogsStatistics & Logs System Information RF820/RF820-AP Screen RF830/RF830-AP ScreenLog Access to Administrative Access Port All Access Requests to Firewall Violating Security PolicyStatistics & Logs Network Interface Details Statistics & Logs Packet Filter LogStatistics & Logs Pptp Live Log Statistics & Logs IPSec Live LogStatistics & Logs Dhcp Server Live Log Statistics & Logs Wlan Client Live Log Statistics & Logs PPP Cellular/Analog LogStatistics & Logs Log Traces Statistics & Logs Log TracesSystem Diagnostics as a Troubleshooting Tool TroubleshootingProblem #4 Frequently Asked Questions If all else fails in the installation, what can I do? How do I access the Router’s setup pages with a Mac?How will I be notified of new router firmware upgrades? Which modems are compatible with the router?Appendix a Table of Commonly Supported Subnet Addresses Network Number Hosts Available Broadcast Address Antenna Electrical Characteristics Appendix B Antenna for Wireless RouteFinderAntenna MechanicalWeee Appendix C Waste Electrical Electronic Equipment DirectiveAES GlossaryIKE Isdn TA Pptp PingSsid WEP TkipWPA-PSK Wlan Wireless Local Area NetworkData Encryption Standard DES Definition IndexNetwork Setup PPP Cellular/Analog Modem Stats & Logs Dhcp Server Live Log