Multitech manual Back Panels, RF820 RF820-AP RF830 RF830-AP, Connector

Page 8

Chapter 1 – Introduction and Description

Back Panels

RF820

RF820-AP

RF830

RF830-AP

Connector

Antenna Connector

WAN

LAN Ports

Reset

Serial

12VDC Power

Description

Connector for the 2.4 GHz 5dBi SWI-Reverse-F antenna.

Note: The antenna must be attached in order for the RouteFinder to be operational.

The WAN (10/100BaseT) port connects the DSL modem or cable modem.

The RF820 and 820-AP have one WAN port and the RF830 and RF830-AP have two WAN ports.

There are 4 LAN ports. You can connect to PCs, FTP servers, printers, or other devices you want to put on your network.

The Reset button resets the RouteFinder to its factory defaults. Press and hold the Reset button until the Status LED blinks, and then release it. Do not press this button unless you want to restore all settings to the factory defaults.

(RF820 and RF820-AP only) The Serial port connects to a standard modem. The power port connects the AC power adapter.

Multi-Tech Systems, Inc. RouteFinder SOHO RF820/RF820-AP & RF830/RF830-AP User Guide (S000399E)

8

Image 8

Contents RouteFinder→ Soho Warranty Trademarks Revision Date DescriptionPatents World HeadquartersContents Key Features Introduction DescriptionFeature Details RouteFinder Ship Kit Contents RouteFinder DocumentationTelecom Warnings for the Modem RF820/RF820-AP Front Panel RF830/RF830-AP Front PanelLEDs DescriptionRF820 RF820-AP RF830 RF830-AP ConnectorBack Panels Typical Applications VPN SpecificationsSpecifications RF820 and RF820-AP RF830 and RF830-AP RF8230AP and RF830AP Specifications for 802.11b/g InterfaceSpecifications Installation Cabling Your RouteFinderRF820 RF820-APRF830 RF830-APSetting up a Workstation and Starting RouteFinder Establish TCP/IP CommunicationTo Set a Fixed IP Address Click the Properties buttonOpen a Web Browser Navigating the Screens Menu Bar Sub Other Options Screen Name Input AreaNetwork Setup Wireless Menu BarSub-Menus Table of Menus and Sub-MenusAbout IPSec Configuring RouteFinderStart the RouteFinder Configuration Using the Wizard Setup Screen to Configure Your RouteFinder RouteFinder Initial ConfigurationWizard Setup Screen NotesWAN 1 Static IP Choice ISP SettingsWAN 1 Dhcp Client Choice WAN 1 PPPoE Choice MTU Restart Important Note About Save and RestartSave to Flash Memory Configuration Using Web Management Software AdministrationAdministration System Setup Administration System SetupEmail Address Auto Reboot TimerConfigure Email Notification Administration Administrative Access Administrative AccessAdministration Administrative Access Screen NoteChange Password Administrative Access Http PortOld Password, New Password, Confirmation Web Interface Inactivity Time OutAdministration System Logs Administration Remote SyslogAdministration System Logs Administration Remote Syslog Remote SyslogAdministration Sntp Client Sntp ConfigurationAdministration Sntp Client General ConfigurationAdministration Sntp Client Time Zone Configuration Daylight ConfigurationDaylight Saving Start Time Daylight Saving End TimeAdministration Tools Administration ToolsAdministration Factory Defaults Reset ModemReset to Factory Defaults Administration Tools Administration Factory DefaultsNetworks & Services Network Configuration Networks & ServicesNetworks & Services Network Configuration RF830/RF830-AP Network Configuration Screen Network Configuration FieldsHow to Confirm Your Entries Important Network NotesThis is an example of screen with the TCP protocol selected Networks & Services ServicesNetworks & Services Service Configuration Service Configuration Editing and Deleting User-Added ServicesTCP, UDP, and TCP& UDP AH and ESPNetwork Setup IP Settings Network SetupNetwork Setup IP Settings WAN Choice Dhcp Client Default Default GatewayWAN Choice Static IP WAN 1 & WAN 2 WAN 2 is for the RF830/RF830-AP onlyWAN Choice PPPoE Network Setup Wireless LAN Wlan SettingsNetwork Setup Wireless LAN Wlan Security Security Selection DisableWlan Security Select SecurityWPA-PSK/WPA2-PSK Key Network Setup Wireless LAN Wlan Security WEP KeyWEP Key to Index Group Key Rekeying Network Setup Wireless LAN Wlan Client Filter Access Control ListNetwork Setup Advanced IP Settings Network Setup PPP Cellular/Analog Backup PPP Client for Cellular/Analog Modem BackupNetwork Setup PPP Cellular/Analog Backup Screen Note This screen applies to the RF820/RF820-AP onlySignal Strength only for Cellular Modems Modem Initialization StringsSIM Initialization String only for Cellular Modems PPP Keep-Alive ParametersNetwork Setup Load Balancing Load Balancing Weight ConfigurationLoad Balancing Keep Alive URL Configuration Network Setup Load BalancingDdns Failover for the RF830/RF830-AP only Network Setup Dynamic DNSNetwork Setup Dynamic DNS Use Wildcard Custom DNSCheck IP Check IP ServerNetwork Setup Static Routes Network Setup IP MasqueradingService Network Setup SnatNetwork Setup Snat Network Setup Dnat Network Setup DnatAdd Dnat Definition WAN IPPacket Filters Packet Filter Packet Filter RulesServices From Host/NetworksTo Host/Networks ActionPacket Filters Advanced Filters Packet Filters Advanced FiltersPacket Filter Icmp Packet Filter Packet Filter LogIcmp Forwarding Icmp on FirewallVPN Virtual Private Network VPN IPSecVPN IPSec Add a New ConnectionAdd an IKE Connection Add IKE ConnectionNetBIOS Broadcast VPN IPSec Add IKE Connection Key LifeNumber of Retries Left Next HopVPN IPSec Add Manual Connection Add a Manual ConnectionAdd Manual Connection Fqdn Pptp Settings Pptp StatusEncryption Strength Select Remote AddressAuthentication Type Select Radius User AuthenticationAuthentication Type Proxy Proxy Http ProxyHttp Status Http Allowed NetworksProxy Custom Filters Proxy DNS Proxy DNS ProxyProxy DNS Proxy LAN StatusDhcp Server LAN Subnet Settings Dhcp Server LAN Subnet SettingsDhcp Server Dhcp Server on LANAdd Fixed Address Dhcp Server Wlan Subnet Settings and Wlan Fixed AddressesAdd Fixed Address Utilities Backup Utilities Firmware UpgradeUtilities Backup Utilities Firmware Upgrade BackupStatistics & Logs Statistics & Logs System InformationStatistics & Logs System Information RF820/RF820-AP Screen RF830/RF830-AP ScreenAll Access Requests to Firewall Violating Security Policy Log Access to Administrative Access PortStatistics & Logs Network Interface Details Statistics & Logs Packet Filter LogStatistics & Logs Dhcp Server Live Log Statistics & Logs IPSec Live LogStatistics & Logs Pptp Live Log Statistics & Logs PPP Cellular/Analog Log Statistics & Logs Wlan Client Live LogStatistics & Logs Log Traces Statistics & Logs Log TracesTroubleshooting System Diagnostics as a Troubleshooting ToolProblem #4 Frequently Asked Questions How do I access the Router’s setup pages with a Mac? If all else fails in the installation, what can I do?How will I be notified of new router firmware upgrades? Which modems are compatible with the router?Appendix a Table of Commonly Supported Subnet Addresses Network Number Hosts Available Broadcast Address Appendix B Antenna for Wireless RouteFinder Antenna Electrical CharacteristicsAntenna MechanicalAppendix C Waste Electrical Electronic Equipment Directive WeeeGlossary AESIKE Isdn TA Ssid PingPptp Tkip WEPWlan Wireless Local Area Network WPA-PSKIndex Data Encryption Standard DES DefinitionNetwork Setup PPP Cellular/Analog Modem Stats & Logs Dhcp Server Live Log