Appendix B – Antenna for the Wireless RouteFinder
Appendix B – Antenna for the
Wireless RouteFinder
The Antenna
Your ship kit for the wireless RouteFinders
Important Notes:
•The antenna for this product must be a reverse polarity SMA antenna.
•The antenna must be attached in order for the RouteFinder to be operational.
Antenna Electrical Characteristics
Frequency: | 2400 to 2500 MHZ |
Gain: | 4.5dBi (nominal) |
VSWR: | ≤ 2 |
Polarization: | Linear, Vertical |
Maximum Power: | 20W |
Impedance: | 50 Ω |
Connector: | |
| Reverse Polarity Meets FCC Part 15.203 Requirements |
Mechanical
Testing Condition Note:
Endurance
Number of connection/disconnection of the connector: 500 cycles
Number of 360° rotation of the connector: 1000 cycles
Mandatory: Guaranty of functionalities after test
Bending
Number of 90° at the hinge parts and bending on one direction with 1kg force: 1000 cycles
Mandatory: No mechanical damage tolerated. Guaranty of functionalities after test.
Antenna Resistance
Tests are applicable to all parts and both sides.
Traction
Tractions force applied 3 times on plugs during 15 seconds: 5kg
Mandatory: No mechanical damage tolerated. Guaranty of functionalities after test.
Environmental
Storage
Condition:
Cold:
Dry Heat: +80°C during 96h (IEC
Humidity: +40°C at 95% R.H. during 4 days (IEC
Mandatory: No mechanical or visible damage tolerated. Guaranty of functionalities after test.
Operation
Condition: Operating during test.
Cold:
Dry Heat: +55°C during 48h (IEC
Humidity:
Mandatory: No mechanical or visible damage tolerated. Guaranty of functionalities during and after test.
84 |