Scientific Atlanta EPR2320, DPR2320 manual Setup Advanced Settings Options Page Description

WebSTAR DPR2320 and EPR2320 Gateway Cable Modems User’s Guide

Setup Advanced Settings – Options Page Description

The following table provides a description of the fields within the Setup Advanced

Settings – Options page.

If you make changes in the Setup Advanced Settings – Options page, click

Apply to apply and save your new IP address filter settings.

Field Name	Description
WAN Blocking	Checking this box prevents the gateway cable modem
	from being visible to the WAN. For example, pings to the
	WAN IP address are not returned
Ipsec PassThrough	Checking this box allows applications that use IPSec (IP
	Security) to pass through the firewall
PPTP PassThrough	Checking this box allows applications that use Point to
	Point Tunneling Protocol (PPTP) to pass through the
	firewall
Remote Config	Checking this box enables Remote Configuration
Management	Management that allows the user or network operator to
	view and/or modify the gateway set-up parameters from
	a location on the WAN, as opposed to the LAN side of
	the gateway. Access to the set-up parameters is
	obtained by using the password to access the
	WebWizard.
	Enable this feature by checking the Remote Config
	Management box on the Setup Advanced Settings –
	Options page. To access your gateway from a remote
	location, you must also know the WAN IP address of the
	gateway. To find the WAN IP address, go to the
	Network Configuration page under Basic Settings. You
	will find the gateway’s WAN IP address list on this page.
	Enter the WAN IP address of your gateway into the
	address field of any Web browser using the following
	format: http://xxx.xxx.xxx.xxx:8080 where
	xxx.xxx.xxx.xxx represents the WAN IP address of your
	gateway.
	Be sure to follow the syntax exactly, and then click Go
	or press Enter. Your gateway Web pages will appear on
	the remote computer. You will still need to enter your
	password to access the Setup pages of your gateway
	If you choose to enable (check) this feature, be
	sure to set up a user password to prevent unauthorized
	access to your gateway settings.
Multicast Enable	Checking this box allows multicasts to pass from the
	WAN side through to the private network

46